linux-4.17-rc4 marvell-nand.c driver problems

[Miquel Raynal]

Hi Greg,

On Mon, 14 May 2018 09:53:26 +1000, Greg Ungerer <gerg at kernel.org>
wrote:

> Hi Boris,
> 
> On 11/05/18 18:02, Boris Brezillon wrote:
> > On Fri, 11 May 2018 17:11:28 +1000
> > Greg Ungerer <gerg at kernel.org> wrote:  
> >> I have a hardware platform built around the Armada 370 using NAND flash.
> >> Its old hardware, and has run pretty much every kernel version from
> >> 3.10 up to 4.16 with no problems. The flash is 128Mbyte SLC from various
> >> vendors (Spansion, Micron, etc).
> >>
> >> It has always been using the pxa3xx_nand.c driver up to now. With that
> >> gone in 4.17 I am trying out the marvell_nand.c driver. I am getting
> >> a dump just after startup:
> > > Can you try to cherry-pick this commit [1] (it should appear in  
> > 4.17-rc5).  
> 
> That fixes the problem. Thanks for the quick response.
> 


Sorry for the delay, good to know it fixed your setup, sorry for the
inconvenience.

Thanks,
Miquèl

-- 
Miquel Raynal, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com