[PATCH] mtd: cfi_cmdset_0002: Change write buffer to check correct value

[IKEGAMI Tokunori]

From: Tokunori Ikegami <ikegami at allied-telesis.co.jp>

For the word write it is checked if the chip has the correct value.
But it is not checked for the write buffer as only checked if ready.
To make sure for the write buffer change to check the value.

It is enough as this patch is only checking the last written word.
Since it is described by data sheets to check the operation status.

Signed-off-by: Tokunori Ikegami <ikegami at allied-telesis.co.jp>
Cc: Chris Packham <chris.packham at alliedtelesis.co.nz>
Cc: Brian Norris <computersforpeace at gmail.com>
Cc: David Woodhouse <dwmw2 at infradead.org>
Cc: Boris Brezillon <boris.brezillon at free-electrons.com>
Cc: Marek Vasut <marek.vasut at gmail.com>
Cc: Richard Weinberger <richard at nod.at>
Cc: Cyrille Pitchen <cyrille.pitchen at wedev4u.fr>
Cc: linux-mtd at lists.infradead.org
---
 drivers/mtd/chips/cfi_cmdset_0002.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 56aa6b75213d..5e9f2ca0a6c1 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -1879,7 +1879,7 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
                if (time_after(jiffies, timeo) && !chip_ready(map, adr))
                        break;

-               if (chip_ready(map, adr)) {
+               if (chip_ready(map, adr) && chip_good(map, adr, datum)) {
                        xip_enable(map, chip, adr);
                        goto op_done;
                }
--
2.16.1