[PATCH v4 7/7] spi: Get rid of the spi_flash_read() API
Frieder Schrempf
frieder.schrempf at exceet.de
Thu May 3 11:40:35 PDT 2018
On 26.04.2018 18:18, Boris Brezillon wrote:
> This API has been replaced by the spi_mem_xx() one, its only user
> (spi-nor) has been converted to spi_mem_xx() and all SPI controller
> drivers that were implementing the ->spi_flash_xxx() hooks are also
> implementing the spi_mem ones. So we can safely get rid of this API.
>
> Signed-off-by: Boris Brezillon <boris.brezillon at bootlin.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf at exceet.de>
Tested-by: Frieder Schrempf <frieder.schrempf at exceet.de>
Regards,
Frieder
> ---
> Changes in v4:
> - none
>
> Changes in v3:
> - none
>
> Changes in v2:
> - none
> ---
> drivers/spi/spi-bcm-qspi.c | 34 +++------------------------
> drivers/spi/spi-bcm53xx.c | 20 +---------------
> drivers/spi/spi-ti-qspi.c | 41 ---------------------------------
> drivers/spi/spi.c | 57 ----------------------------------------------
> include/linux/spi/spi.h | 53 ------------------------------------------
> 5 files changed, 4 insertions(+), 201 deletions(-)
>
> diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
> index 9f94268a68b5..57ceec6c6301 100644
> --- a/drivers/spi/spi-bcm-qspi.c
> +++ b/drivers/spi/spi-bcm-qspi.c
> @@ -944,9 +944,10 @@ static int bcm_qspi_mspi_exec_mem_op(struct spi_device *spi,
> return ret;
> }
>
> -static int bcm_qspi_exec_mem_op(struct spi_device *spi,
> +static int bcm_qspi_exec_mem_op(struct spi_mem *mem,
> const struct spi_mem_op *op)
> {
> + struct spi_device *spi = mem->spi;
> struct bcm_qspi *qspi = spi_master_get_devdata(spi->master);
> int ret = 0;
> bool mspi_read = false;
> @@ -991,34 +992,6 @@ static int bcm_qspi_exec_mem_op(struct spi_device *spi,
> return ret;
> }
>
> -static int bcm_qspi_exec_mem_op_wrapper(struct spi_mem *mem,
> - const struct spi_mem_op *op)
> -{
> - return bcm_qspi_exec_mem_op(mem->spi, op);
> -}
> -
> -static int bcm_qspi_flash_read_wrapper(struct spi_device *spi,
> - struct spi_flash_read_message *msg)
> -{
> - int ret;
> - struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(msg->read_opcode, 1),
> - SPI_MEM_OP_ADDR(msg->addr_width,
> - msg->from,
> - msg->addr_nbits),
> - SPI_MEM_OP_DUMMY(msg->dummy_bytes,
> - msg->addr_nbits),
> - SPI_MEM_OP_DATA_IN(msg->len,
> - msg->buf,
> - msg->data_nbits));
> -
> - msg->retlen = 0;
> - ret = bcm_qspi_exec_mem_op(spi, &op);
> - if (!ret)
> - msg->retlen = msg->len;
> -
> - return ret;
> -}
> -
> static void bcm_qspi_cleanup(struct spi_device *spi)
> {
> struct bcm_qspi_parms *xp = spi_get_ctldata(spi);
> @@ -1214,7 +1187,7 @@ static void bcm_qspi_hw_uninit(struct bcm_qspi *qspi)
> }
>
> static const struct spi_controller_mem_ops bcm_qspi_mem_ops = {
> - .exec_op = bcm_qspi_exec_mem_op_wrapper,
> + .exec_op = bcm_qspi_exec_mem_op,
> };
>
> static const struct of_device_id bcm_qspi_of_match[] = {
> @@ -1259,7 +1232,6 @@ int bcm_qspi_probe(struct platform_device *pdev,
> master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_RX_DUAL | SPI_RX_QUAD;
> master->setup = bcm_qspi_setup;
> master->transfer_one = bcm_qspi_transfer_one;
> - master->spi_flash_read = bcm_qspi_flash_read_wrapper;
> master->mem_ops = &bcm_qspi_mem_ops;
> master->cleanup = bcm_qspi_cleanup;
> master->dev.of_node = dev->of_node;
> diff --git a/drivers/spi/spi-bcm53xx.c b/drivers/spi/spi-bcm53xx.c
> index 5044e4e4a263..890b58e8645f 100644
> --- a/drivers/spi/spi-bcm53xx.c
> +++ b/drivers/spi/spi-bcm53xx.c
> @@ -290,22 +290,6 @@ static const struct spi_controller_mem_ops bcm53xxspi_mem_ops = {
> .exec_op = bcm53xxspi_exec_mem_op,
> };
>
> -static int bcm53xxspi_flash_read(struct spi_device *spi,
> - struct spi_flash_read_message *msg)
> -{
> - struct bcm53xxspi *b53spi = spi_master_get_devdata(spi->master);
> - int ret = 0;
> -
> - if (msg->from + msg->len > BCM53XXSPI_FLASH_WINDOW)
> - return -EINVAL;
> -
> - bcm53xxspi_enable_bspi(b53spi);
> - memcpy_fromio(msg->buf, b53spi->mmio_base + msg->from, msg->len);
> - msg->retlen = msg->len;
> -
> - return ret;
> -}
> -
> /**************************************************
> * BCMA
> **************************************************/
> @@ -344,10 +328,8 @@ static int bcm53xxspi_bcma_probe(struct bcma_device *core)
>
> master->dev.of_node = dev->of_node;
> master->transfer_one = bcm53xxspi_transfer_one;
> - if (b53spi->mmio_base) {
> + if (b53spi->mmio_base)
> master->mem_ops = &bcm53xxspi_mem_ops;
> - master->spi_flash_read = bcm53xxspi_flash_read;
> - }
>
> bcma_set_drvdata(core, b53spi);
>
> diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
> index 1b12c2ff8be3..c54b760e00ed 100644
> --- a/drivers/spi/spi-ti-qspi.c
> +++ b/drivers/spi/spi-ti-qspi.c
> @@ -531,44 +531,6 @@ static void ti_qspi_setup_mmap_read(struct spi_device *spi, u8 opcode,
> QSPI_SPI_SETUP_REG(spi->chip_select));
> }
>
> -static bool ti_qspi_spi_flash_can_dma(struct spi_device *spi,
> - struct spi_flash_read_message *msg)
> -{
> - return virt_addr_valid(msg->buf);
> -}
> -
> -static int ti_qspi_spi_flash_read(struct spi_device *spi,
> - struct spi_flash_read_message *msg)
> -{
> - struct ti_qspi *qspi = spi_master_get_devdata(spi->master);
> - int ret = 0;
> -
> - mutex_lock(&qspi->list_lock);
> -
> - if (!qspi->mmap_enabled)
> - ti_qspi_enable_memory_map(spi);
> - ti_qspi_setup_mmap_read(spi, msg->read_opcode, msg->data_nbits,
> - msg->addr_width, msg->dummy_bytes);
> -
> - if (qspi->rx_chan) {
> - if (msg->cur_msg_mapped)
> - ret = ti_qspi_dma_xfer_sg(qspi, msg->rx_sg, msg->from);
> - else
> - ret = ti_qspi_dma_bounce_buffer(qspi, msg->from,
> - msg->buf, msg->len);
> - if (ret)
> - goto err_unlock;
> - } else {
> - memcpy_fromio(msg->buf, qspi->mmap_base + msg->from, msg->len);
> - }
> - msg->retlen = msg->len;
> -
> -err_unlock:
> - mutex_unlock(&qspi->list_lock);
> -
> - return ret;
> -}
> -
> static int ti_qspi_exec_mem_op(struct spi_mem *mem,
> const struct spi_mem_op *op)
> {
> @@ -727,7 +689,6 @@ static int ti_qspi_probe(struct platform_device *pdev)
> master->dev.of_node = pdev->dev.of_node;
> master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(16) |
> SPI_BPW_MASK(8);
> - master->spi_flash_read = ti_qspi_spi_flash_read;
> master->mem_ops = &ti_qspi_mem_ops;
>
> if (!of_property_read_u32(np, "num-cs", &num_cs))
> @@ -827,7 +788,6 @@ static int ti_qspi_probe(struct platform_device *pdev)
> dma_release_channel(qspi->rx_chan);
> goto no_dma;
> }
> - master->spi_flash_can_dma = ti_qspi_spi_flash_can_dma;
> master->dma_rx = qspi->rx_chan;
> init_completion(&qspi->transfer_complete);
> if (res_mmap)
> @@ -841,7 +801,6 @@ static int ti_qspi_probe(struct platform_device *pdev)
> "mmap failed with error %ld using PIO mode\n",
> PTR_ERR(qspi->mmap_base));
> qspi->mmap_base = NULL;
> - master->spi_flash_read = NULL;
> master->mem_ops = NULL;
> }
> }
> diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
> index c85b0cf7b4a9..8ee1ba13eb23 100644
> --- a/drivers/spi/spi.c
> +++ b/drivers/spi/spi.c
> @@ -3055,63 +3055,6 @@ int spi_async_locked(struct spi_device *spi, struct spi_message *message)
> }
> EXPORT_SYMBOL_GPL(spi_async_locked);
>
> -
> -int spi_flash_read(struct spi_device *spi,
> - struct spi_flash_read_message *msg)
> -
> -{
> - struct spi_controller *master = spi->controller;
> - struct device *rx_dev = NULL;
> - int ret;
> -
> - if ((msg->opcode_nbits == SPI_NBITS_DUAL ||
> - msg->addr_nbits == SPI_NBITS_DUAL) &&
> - !(spi->mode & (SPI_TX_DUAL | SPI_TX_QUAD)))
> - return -EINVAL;
> - if ((msg->opcode_nbits == SPI_NBITS_QUAD ||
> - msg->addr_nbits == SPI_NBITS_QUAD) &&
> - !(spi->mode & SPI_TX_QUAD))
> - return -EINVAL;
> - if (msg->data_nbits == SPI_NBITS_DUAL &&
> - !(spi->mode & (SPI_RX_DUAL | SPI_RX_QUAD)))
> - return -EINVAL;
> - if (msg->data_nbits == SPI_NBITS_QUAD &&
> - !(spi->mode & SPI_RX_QUAD))
> - return -EINVAL;
> -
> - if (master->auto_runtime_pm) {
> - ret = pm_runtime_get_sync(master->dev.parent);
> - if (ret < 0) {
> - dev_err(&master->dev, "Failed to power device: %d\n",
> - ret);
> - return ret;
> - }
> - }
> -
> - mutex_lock(&master->bus_lock_mutex);
> - mutex_lock(&master->io_mutex);
> - if (master->dma_rx && master->spi_flash_can_dma(spi, msg)) {
> - rx_dev = master->dma_rx->device->dev;
> - ret = spi_map_buf(master, rx_dev, &msg->rx_sg,
> - msg->buf, msg->len,
> - DMA_FROM_DEVICE);
> - if (!ret)
> - msg->cur_msg_mapped = true;
> - }
> - ret = master->spi_flash_read(spi, msg);
> - if (msg->cur_msg_mapped)
> - spi_unmap_buf(master, rx_dev, &msg->rx_sg,
> - DMA_FROM_DEVICE);
> - mutex_unlock(&master->io_mutex);
> - mutex_unlock(&master->bus_lock_mutex);
> -
> - if (master->auto_runtime_pm)
> - pm_runtime_put(master->dev.parent);
> -
> - return ret;
> -}
> -EXPORT_SYMBOL_GPL(spi_flash_read);
> -
> /*-------------------------------------------------------------------------*/
>
> /* Utility methods for SPI protocol drivers, layered on
> diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
> index a7e0bbed738c..a64235e05321 100644
> --- a/include/linux/spi/spi.h
> +++ b/include/linux/spi/spi.h
> @@ -26,7 +26,6 @@ struct dma_chan;
> struct property_entry;
> struct spi_controller;
> struct spi_transfer;
> -struct spi_flash_read_message;
> struct spi_controller_mem_ops;
>
> /*
> @@ -382,11 +381,6 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
> * controller has native support for memory like operations.
> * @unprepare_message: undo any work done by prepare_message().
> * @slave_abort: abort the ongoing transfer request on an SPI slave controller
> - * @spi_flash_read: to support spi-controller hardwares that provide
> - * accelerated interface to read from flash devices.
> - * @spi_flash_can_dma: analogous to can_dma() interface, but for
> - * controllers implementing spi_flash_read.
> - * @flash_read_supported: spi device supports flash read
> * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS
> * number. Any individual value may be -ENOENT for CS lines that
> * are not GPIOs (driven by the SPI controller itself).
> @@ -552,11 +546,6 @@ struct spi_controller {
> int (*unprepare_message)(struct spi_controller *ctlr,
> struct spi_message *message);
> int (*slave_abort)(struct spi_controller *ctlr);
> - int (*spi_flash_read)(struct spi_device *spi,
> - struct spi_flash_read_message *msg);
> - bool (*spi_flash_can_dma)(struct spi_device *spi,
> - struct spi_flash_read_message *msg);
> - bool (*flash_read_supported)(struct spi_device *spi);
>
> /*
> * These hooks are for drivers that use a generic implementation
> @@ -1190,48 +1179,6 @@ static inline ssize_t spi_w8r16be(struct spi_device *spi, u8 cmd)
> return be16_to_cpu(result);
> }
>
> -/**
> - * struct spi_flash_read_message - flash specific information for
> - * spi-masters that provide accelerated flash read interfaces
> - * @buf: buffer to read data
> - * @from: offset within the flash from where data is to be read
> - * @len: length of data to be read
> - * @retlen: actual length of data read
> - * @read_opcode: read_opcode to be used to communicate with flash
> - * @addr_width: number of address bytes
> - * @dummy_bytes: number of dummy bytes
> - * @opcode_nbits: number of lines to send opcode
> - * @addr_nbits: number of lines to send address
> - * @data_nbits: number of lines for data
> - * @rx_sg: Scatterlist for receive data read from flash
> - * @cur_msg_mapped: message has been mapped for DMA
> - */
> -struct spi_flash_read_message {
> - void *buf;
> - loff_t from;
> - size_t len;
> - size_t retlen;
> - u8 read_opcode;
> - u8 addr_width;
> - u8 dummy_bytes;
> - u8 opcode_nbits;
> - u8 addr_nbits;
> - u8 data_nbits;
> - struct sg_table rx_sg;
> - bool cur_msg_mapped;
> -};
> -
> -/* SPI core interface for flash read support */
> -static inline bool spi_flash_read_supported(struct spi_device *spi)
> -{
> - return spi->controller->spi_flash_read &&
> - (!spi->controller->flash_read_supported ||
> - spi->controller->flash_read_supported(spi));
> -}
> -
> -int spi_flash_read(struct spi_device *spi,
> - struct spi_flash_read_message *msg);
> -
> /*---------------------------------------------------------------------------*/
>
> /*
>
More information about the linux-mtd
mailing list