[PATCH][v3] mtd: rawnand: fsl_ifc: Fix nand waitfunc return value

[Boris Brezillon]

On Wed, 21 Mar 2018 04:31:36 +0530
Jagdish Gediya <jagdish.gediya at nxp.com> wrote:

> As per the IFC hardware manual, Most significant 2 bytes in
> nand_fsr register are the outcome of NAND READ STATUS command.
> 
> So status value need to be shifted and aligned as per the nand
> framework requirement.
> 
> Fixes: 82771882d960 ("NAND Machine support for Integrated Flash Controller")
> Cc: stable at vger.kernel.org # v3.18+
> Signed-off-by: Jagdish Gediya <jagdish.gediya at nxp.com>
> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>

Applied.

Thanks,

Boris

> ---
> Changes for v2: Incorporated comments from Boris Brezillon
>         - Added fixes tag
> 
> Changes for v3: Incorporated comments from Boris Brezillon
> 
>  drivers/mtd/nand/fsl_ifc_nand.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
> index 9390cbd..16104ca 100644
> --- a/drivers/mtd/nand/fsl_ifc_nand.c
> +++ b/drivers/mtd/nand/fsl_ifc_nand.c
> @@ -629,6 +629,7 @@ static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip)
>  	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
>  	struct fsl_ifc_runtime __iomem *ifc = ctrl->rregs;
>  	u32 nand_fsr;
> +	int status;
>  
>  	/* Use READ_STATUS command, but wait for the device to be ready */
>  	ifc_out32((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
> @@ -643,12 +644,12 @@ static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip)
>  	fsl_ifc_run_command(mtd);
>  
>  	nand_fsr = ifc_in32(&ifc->ifc_nand.nand_fsr);
> -
> +	status = nand_fsr >> 24;
>  	/*
>  	 * The chip always seems to report that it is
>  	 * write-protected, even when it is not.
>  	 */
> -	return nand_fsr | NAND_STATUS_WP;
> +	return status | NAND_STATUS_WP;
>  }
>  
>  /*



-- 
Boris Brezillon, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com