[PATCH v4 08/13] mtd: rawnand: prepare the removal of ONFI/JEDEC parameter pages
Miquel Raynal
miquel.raynal at bootlin.com
Mon Mar 19 02:38:06 PDT 2018
The NAND chip parameter page is statically allocated within the
nand_chip structure, which reserves a lot of space. Even not ONFI nor
JEDEC chips have it embedded. Also, only a few parameters are actually
read from the parameter page after the detection.
To prepare to the removal of such huge structure, a small NAND parameter
structure is allocated statically and contains only very few members
that are generic to all chips and actually used elsewhere in the code.
Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
---
drivers/mtd/nand/raw/nand_base.c | 34 +++++++++++++++-------------------
include/linux/mtd/rawnand.h | 13 +++++++++++++
2 files changed, 28 insertions(+), 19 deletions(-)
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index e5bcfbf7c7f6..c3bc814a9beb 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -1174,9 +1174,7 @@ int nand_get_features(struct nand_chip *chip, int addr,
{
struct mtd_info *mtd = nand_to_mtd(chip);
- if (!chip->onfi_version ||
- !(le16_to_cpu(chip->onfi_params.opt_cmd)
- & ONFI_OPT_CMD_SET_GET_FEATURES))
+ if (!chip->parameters.supports_set_get_features)
return -ENOTSUPP;
return chip->get_features(mtd, chip, addr, subfeature_param);
@@ -1197,9 +1195,7 @@ int nand_set_features(struct nand_chip *chip, int addr,
{
struct mtd_info *mtd = nand_to_mtd(chip);
- if (!chip->onfi_version ||
- !(le16_to_cpu(chip->onfi_params.opt_cmd)
- & ONFI_OPT_CMD_SET_GET_FEATURES))
+ if (!chip->parameters.supports_set_get_features)
return -ENOTSUPP;
return chip->set_features(mtd, chip, addr, subfeature_param);
@@ -5150,8 +5146,10 @@ static int nand_flash_detect_onfi(struct nand_chip *chip)
sanitize_string(p->manufacturer, sizeof(p->manufacturer));
sanitize_string(p->model, sizeof(p->model));
+ strncpy(chip->parameters.model, p->model,
+ sizeof(chip->parameters.model) - 1);
if (!mtd->name)
- mtd->name = p->model;
+ mtd->name = chip->parameters.model;
mtd->writesize = le32_to_cpu(p->byte_per_page);
@@ -5198,6 +5196,10 @@ static int nand_flash_detect_onfi(struct nand_chip *chip)
pr_warn("Could not retrieve ONFI ECC requirements\n");
}
+ /* Save some parameters from the parameter page for future use */
+ if (le16_to_cpu(p->opt_cmd) & ONFI_OPT_CMD_SET_GET_FEATURES)
+ chip->parameters.supports_set_get_features = true;
+
return 1;
}
@@ -5250,8 +5252,10 @@ static int nand_flash_detect_jedec(struct nand_chip *chip)
sanitize_string(p->manufacturer, sizeof(p->manufacturer));
sanitize_string(p->model, sizeof(p->model));
+ strncpy(chip->parameters.model, p->model,
+ sizeof(chip->parameters.model) - 1);
if (!mtd->name)
- mtd->name = p->model;
+ mtd->name = chip->parameters.model;
mtd->writesize = le32_to_cpu(p->byte_per_page);
@@ -5652,17 +5656,9 @@ static int nand_detect(struct nand_chip *chip, struct nand_flash_dev *type)
pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n",
maf_id, dev_id);
-
- if (chip->onfi_version)
- pr_info("%s %s\n", nand_manufacturer_name(manufacturer),
- chip->onfi_params.model);
- else if (chip->jedec_version)
- pr_info("%s %s\n", nand_manufacturer_name(manufacturer),
- chip->jedec_params.model);
- else
- pr_info("%s %s\n", nand_manufacturer_name(manufacturer),
- type->name);
-
+ pr_info("%s %s\n", nand_manufacturer_name(manufacturer),
+ (chip->onfi_version || chip->jedec_version) ?
+ chip->parameters.model : type->name);
pr_info("%d MiB, %s, erase size: %d KiB, page size: %d, OOB size: %d\n",
(int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC",
mtd->erasesize >> 10, mtd->writesize, mtd->oobsize);
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 3cc2a3435b20..a24591411d78 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -429,6 +429,16 @@ struct nand_jedec_params {
__le16 crc;
} __packed;
+/**
+ * struct nand_parameters - NAND generic parameters from the parameter page
+ * @model: Model name
+ * @supports_set_get_features: The NAND chip supports setting/getting features
+ */
+struct nand_parameters {
+ char model[100];
+ bool supports_set_get_features;
+};
+
/* The maximum expected count of bytes in the NAND ID sequence */
#define NAND_MAX_ID_LEN 8
@@ -1165,6 +1175,8 @@ int nand_op_parser_exec_op(struct nand_chip *chip,
* supported, 0 otherwise.
* @jedec_params: [INTERN] holds the JEDEC parameter page when JEDEC is
* supported, 0 otherwise.
+ * @parameters: [INTERN] holds generic parameters under an easily
+ * readable form.
* @max_bb_per_die: [INTERN] the max number of bad blocks each die of a
* this nand device will encounter their life times.
* @blocks_per_die: [INTERN] The number of PEBs in a die
@@ -1249,6 +1261,7 @@ struct nand_chip {
struct nand_onfi_params onfi_params;
struct nand_jedec_params jedec_params;
};
+ struct nand_parameters parameters;
u16 max_bb_per_die;
u32 blocks_per_die;
--
2.14.1
More information about the linux-mtd
mailing list