[PATCH v2 21/21] usb: Remove depends on HAS_DMA in case of platform dependency

[Geert Uytterhoeven]

Remove dependencies on HAS_DMA where a Kconfig symbol depends on another
symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST".
In most cases this other symbol is an architecture or platform specific
symbol, or PCI.

Generic symbols and drivers without platform dependencies keep their
dependencies on HAS_DMA, to prevent compiling subsystems or drivers that
cannot work anyway.

This simplifies the dependencies, and allows to improve compile-testing.

Signed-off-by: Geert Uytterhoeven <geert at linux-m68k.org>
Reviewed-by: Mark Brown <broonie at kernel.org>
Acked-by: Robin Murphy <robin.murphy at arm.com>
Acked-by: Felipe Balbi <felipe.balbi at linux.intel.com> [drivers/usb/gadget/]
---
v2:
  - Add Reviewed-by, Acked-by,
  - Drop RFC state,
  - Split per subsystem.
---
 drivers/usb/gadget/udc/Kconfig | 4 ++--
 drivers/usb/mtu3/Kconfig       | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index 0875d38476ee9395..9c3b4f86965e80c7 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -179,7 +179,7 @@ config USB_R8A66597
 
 config USB_RENESAS_USBHS_UDC
 	tristate 'Renesas USBHS controller'
-	depends on USB_RENESAS_USBHS && HAS_DMA
+	depends on USB_RENESAS_USBHS
 	help
 	   Renesas USBHS is a discrete USB host and peripheral controller chip
 	   that supports both full and high speed USB 2.0 data transfers.
@@ -192,7 +192,7 @@ config USB_RENESAS_USBHS_UDC
 config USB_RENESAS_USB3
 	tristate 'Renesas USB3.0 Peripheral controller'
 	depends on ARCH_RENESAS || COMPILE_TEST
-	depends on EXTCON && HAS_DMA
+	depends on EXTCON
 	help
 	   Renesas USB3.0 Peripheral controller is a USB peripheral controller
 	   that supports super, high, and full speed USB 3.0 data transfers.
diff --git a/drivers/usb/mtu3/Kconfig b/drivers/usb/mtu3/Kconfig
index 25cd61947beea51e..c0c0eb88e5eafc74 100644
--- a/drivers/usb/mtu3/Kconfig
+++ b/drivers/usb/mtu3/Kconfig
@@ -2,7 +2,7 @@
 
 config USB_MTU3
 	tristate "MediaTek USB3 Dual Role controller"
-	depends on EXTCON && (USB || USB_GADGET) && HAS_DMA
+	depends on EXTCON && (USB || USB_GADGET)
 	depends on ARCH_MEDIATEK || COMPILE_TEST
 	select USB_XHCI_MTK if USB_SUPPORT && USB_XHCI_HCD
 	help
-- 
2.7.4