[PATCH 01/52] mtd: rawnand: add hooks that may be called during nand_scan()

[Boris Brezillon]

On Fri,  2 Mar 2018 18:03:09 +0100
Miquel Raynal <miquel.raynal at bootlin.com> wrote:

> In order to remove the limitation that forbids dynamic allocation in
> nand_scan_ident(), we must create a path that will be the same for all
> controller drivers. The idea is to use nand_scan() instead of the widely
> implemented nand_scan_ident()/nand_scan_tail() couple. In order to
> achieve this, controller drivers will need to adjust some parameters
> between these two functions depending on the NAND chip wired on them.
> 
> For that, a hook called ->attach_chip() is created in the
> nand_hw_control structure (called *controller in struct nand_chip) of
> the NAND chip structure.
> 
> Another hook, ->detach_chip() is also introduced in order to clean the
> controller driver's potential allocations in case of failure of
> nand_scan_tail(). There is no need for the controller driver to call the
> ->detach_chip() hook directly upon error after a successful nand_scan().  
> In this situation, calling nand_release() as before is enough.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
> ---
>  drivers/mtd/nand/raw/nand_base.c | 21 +++++++++++++++++++--
>  include/linux/mtd/rawnand.h      |  6 ++++++
>  2 files changed, 25 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
> index ef0a44a8c3d5..182904b2fc07 100644
> --- a/drivers/mtd/nand/raw/nand_base.c
> +++ b/drivers/mtd/nand/raw/nand_base.c
> @@ -6647,11 +6647,23 @@ EXPORT_SYMBOL(nand_scan_tail);
>   */
>  int nand_scan(struct mtd_info *mtd, int maxchips)
>  {
> +	struct nand_chip *chip = mtd_to_nand(mtd);
>  	int ret;
>  
>  	ret = nand_scan_ident(mtd, maxchips, NULL);
> -	if (!ret)
> -		ret = nand_scan_tail(mtd);
> +	if (ret)
> +		return ret;
> +
> +	if (chip->ecc.attach_chip) {
> +		ret = chip->ecc.attach_chip(chip);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	ret = nand_scan_tail(mtd);
> +	if (ret && chip->ecc.detach_chip)
> +		chip->ecc.detach_chip(chip);
> +
>  	return ret;
>  }
>  EXPORT_SYMBOL(nand_scan);
> @@ -6679,7 +6691,12 @@ void nand_cleanup(struct nand_chip *chip)
>  
>  	/* Free manufacturer priv data. */
>  	nand_manufacturer_cleanup(chip);
> +
> +	/* Free controller specific allocations after chip identification */
> +	if (chip->ecc.detach_chip)
> +		chip->ecc.detach_chip(chip);
>  }
> +
>  EXPORT_SYMBOL_GPL(nand_cleanup);
>  
>  /**
> diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
> index 348f2aba0b9e..53bb6ef1a7c2 100644
> --- a/include/linux/mtd/rawnand.h
> +++ b/include/linux/mtd/rawnand.h
> @@ -576,6 +576,10 @@ static const struct nand_ecc_caps __name = {			\
>   * @read_oob_raw:	function to read chip OOB data without ECC
>   * @read_oob:	function to read chip OOB data
>   * @write_oob:	function to write chip OOB data
> + * @attach_chip:	Callback that may be called between nand_detec() and
> + *			nand_scan_tail() during nand_scan() (optional).
> + * @detach_chip:	Callback that may be called if nand_scan_tail() fails
> + *			(optional).
>   */
>  struct nand_ecc_ctrl {
>  	nand_ecc_modes_t mode;
> @@ -616,6 +620,8 @@ struct nand_ecc_ctrl {
>  	int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page);
>  	int (*write_oob)(struct mtd_info *mtd, struct nand_chip *chip,
>  			int page);
> +	int (*attach_chip)(struct nand_chip *chip);
> +	void (*detach_chip)(struct nand_chip *chip);

As said in my reply to the cover letter, I'd prefer to have these hooks
in nand_hw_ctrl.

>  };
>  
>  /**



-- 
Boris Brezillon, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com