[PATCH 33/47] mtd: nand: remove bf5xx_nand driver
Arnd Bergmann
arnd at arndb.de
Wed Mar 14 08:35:46 PDT 2018
The blackfin architecture is getting removed, so this driver has
become obsolete.
Signed-off-by: Arnd Bergmann <arnd at arndb.de>
---
drivers/mtd/nand/raw/Kconfig | 32 --
drivers/mtd/nand/raw/Makefile | 1 -
drivers/mtd/nand/raw/bf5xx_nand.c | 861 --------------------------------------
3 files changed, 894 deletions(-)
delete mode 100644 drivers/mtd/nand/raw/bf5xx_nand.c
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 605ec8cce67b..0f2b6f348a0a 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -116,38 +116,6 @@ config MTD_NAND_AU1550
This enables the driver for the NAND flash controller on the
AMD/Alchemy 1550 SOC.
-config MTD_NAND_BF5XX
- tristate "Blackfin on-chip NAND Flash Controller driver"
- depends on BF54x || BF52x
- help
- This enables the Blackfin on-chip NAND flash controller
-
- No board specific support is done by this driver, each board
- must advertise a platform_device for the driver to attach.
-
- This driver can also be built as a module. If so, the module
- will be called bf5xx-nand.
-
-config MTD_NAND_BF5XX_HWECC
- bool "BF5XX NAND Hardware ECC"
- default y
- depends on MTD_NAND_BF5XX
- help
- Enable the use of the BF5XX's internal ECC generator when
- using NAND.
-
-config MTD_NAND_BF5XX_BOOTROM_ECC
- bool "Use Blackfin BootROM ECC Layout"
- default n
- depends on MTD_NAND_BF5XX_HWECC
- help
- If you wish to modify NAND pages and allow the Blackfin on-chip
- BootROM to boot from them, say Y here. This is only necessary
- if you are booting U-Boot out of NAND and you wish to update
- U-Boot from Linux' userspace. Otherwise, you should say N here.
-
- If unsure, say N.
-
config MTD_NAND_S3C2410
tristate "NAND Flash support for Samsung S3C SoCs"
depends on ARCH_S3C24XX || ARCH_S3C64XX
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index f16f59a197a3..165b7ef9e9a1 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -11,7 +11,6 @@ obj-$(CONFIG_MTD_NAND_DENALI) += denali.o
obj-$(CONFIG_MTD_NAND_DENALI_PCI) += denali_pci.o
obj-$(CONFIG_MTD_NAND_DENALI_DT) += denali_dt.o
obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
-obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o
obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o
obj-$(CONFIG_MTD_NAND_TANGO) += tango_nand.o
obj-$(CONFIG_MTD_NAND_DAVINCI) += davinci_nand.o
diff --git a/drivers/mtd/nand/raw/bf5xx_nand.c b/drivers/mtd/nand/raw/bf5xx_nand.c
deleted file mode 100644
index 9a1d8d104570..000000000000
--
2.9.0
More information about the linux-mtd
mailing list