[PATCH] mtdchar: fix usage of mtd_ooblayout_ecc()

[Boris Brezillon]

Hi OuYang,

On Mon,  5 Mar 2018 22:53:46 +0800
OuYang ZhiZhong <oyzhizhong at gmail.com> wrote:

> Section was not properly computed. The value of OOB region definition is
> always ECC section 0 information in the OOB area, but we want to get all
> the ECC bytes information, so we should call
> mtd_ooblayout_ecc(mtd, section++, &oobregion) until it returns -ERANGE.

Oops, indeed.

> 
> This is fixed by using i instead of section.
> 

Fixes: c2b78452a9db ("mtd: use mtd_ooblayout_xxx() helpers where appropriate")
Cc: <stable at vger.kernel.org>


> Signed-off-by: OuYang ZhiZhong <oyzhizhong at gmail.com>
> ---
>  drivers/mtd/mtdchar.c |    8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
> index de8c902..0cc929e 100644
> --- a/drivers/mtd/mtdchar.c
> +++ b/drivers/mtd/mtdchar.c
> @@ -468,7 +468,7 @@ static int shrink_ecclayout(struct mtd_info *mtd,
>  			    struct nand_ecclayout_user *to)
>  {
>  	struct mtd_oob_region oobregion;
> -	int i, section = 0, ret;
> +	int i, ret;
>  
>  	if (!mtd || !to)
>  		return -EINVAL;
> @@ -479,7 +479,7 @@ static int shrink_ecclayout(struct mtd_info *mtd,
>  	for (i = 0; i < MTD_MAX_ECCPOS_ENTRIES;) {
>  		u32 eccpos;
>  
> -		ret = mtd_ooblayout_ecc(mtd, section, &oobregion);
> +		ret = mtd_ooblayout_ecc(mtd, i, &oobregion);

Nope, you're not fixing the problem with that: i is encoding the
->eccpos index, not the OOB section. You should really do section++,
either here, or in the for statement.

>  		if (ret < 0) {
>  			if (ret != -ERANGE)
>  				return ret;
> @@ -515,7 +515,7 @@ static int shrink_ecclayout(struct mtd_info *mtd,
>  static int get_oobinfo(struct mtd_info *mtd, struct nand_oobinfo *to)
>  {
>  	struct mtd_oob_region oobregion;
> -	int i, section = 0, ret;
> +	int i, ret;
>  
>  	if (!mtd || !to)
>  		return -EINVAL;
> @@ -526,7 +526,7 @@ static int get_oobinfo(struct mtd_info *mtd, struct nand_oobinfo *to)
>  	for (i = 0; i < ARRAY_SIZE(to->eccpos);) {
>  		u32 eccpos;
>  
> -		ret = mtd_ooblayout_ecc(mtd, section, &oobregion);
> +		ret = mtd_ooblayout_ecc(mtd, i, &oobregion);

Ditto.

>  		if (ret < 0) {
>  			if (ret != -ERANGE)
>  				return ret;

Thanks,

Boris

-- 
Boris Brezillon, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com