[PATCH v2 1/2] mtd: rawnand: gpmi: add support for specific ECC strength
Stefan Agner
stefan at agner.ch
Sun Mar 4 12:06:01 PST 2018
Add support for specified ECC strength/size using device tree
properties nand-ecc-strength/nand-ecc-step-size.
Signed-off-by: Stefan Agner <stefan at agner.ch>
---
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 30 ++++++++++++++++++++----------
1 file changed, 20 insertions(+), 10 deletions(-)
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 61fdd733492f..d04754289c03 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -198,17 +198,16 @@ static inline bool gpmi_check_ecc(struct gpmi_nand_data *this)
*
* We may have available oob space in this case.
*/
-static int set_geometry_by_ecc_info(struct gpmi_nand_data *this)
+static int set_geometry_by_ecc_info(struct gpmi_nand_data *this,
+ unsigned int ecc_strength,
+ unsigned int ecc_step)
{
struct bch_geometry *geo = &this->bch_geometry;
struct nand_chip *chip = &this->nand;
struct mtd_info *mtd = nand_to_mtd(chip);
unsigned int block_mark_bit_offset;
- if (!(chip->ecc_strength_ds > 0 && chip->ecc_step_ds > 0))
- return -EINVAL;
-
- switch (chip->ecc_step_ds) {
+ switch (ecc_step) {
case SZ_512:
geo->gf_len = 13;
break;
@@ -221,8 +220,8 @@ static int set_geometry_by_ecc_info(struct gpmi_nand_data *this)
chip->ecc_strength_ds, chip->ecc_step_ds);
return -EINVAL;
}
- geo->ecc_chunk_size = chip->ecc_step_ds;
- geo->ecc_strength = round_up(chip->ecc_strength_ds, 2);
+ geo->ecc_chunk_size = ecc_step;
+ geo->ecc_strength = round_up(ecc_strength, 2);
if (!gpmi_check_ecc(this))
return -EINVAL;
@@ -230,7 +229,7 @@ static int set_geometry_by_ecc_info(struct gpmi_nand_data *this)
if (geo->ecc_chunk_size < mtd->oobsize) {
dev_err(this->dev,
"unsupported nand chip. ecc size: %d, oob size : %d\n",
- chip->ecc_step_ds, mtd->oobsize);
+ ecc_step, mtd->oobsize);
return -EINVAL;
}
@@ -423,9 +422,20 @@ static int legacy_set_geometry(struct gpmi_nand_data *this)
int common_nfc_set_geometry(struct gpmi_nand_data *this)
{
+ struct nand_chip *chip = &this->nand;
+
+ if (chip->ecc.strength > 0 && chip->ecc.size > 0)
+ return set_geometry_by_ecc_info(this, chip->ecc.strength,
+ chip->ecc.size);
+
if ((of_property_read_bool(this->dev->of_node, "fsl,use-minimum-ecc"))
- || legacy_set_geometry(this))
- return set_geometry_by_ecc_info(this);
+ || legacy_set_geometry(this)) {
+ if (!(chip->ecc_strength_ds > 0 && chip->ecc_step_ds > 0))
+ return -EINVAL;
+
+ return set_geometry_by_ecc_info(this, chip->ecc_strength_ds,
+ chip->ecc_step_ds);
+ }
return 0;
}
--
2.16.2
More information about the linux-mtd
mailing list