[PATCH 38/52] mtd: rawnand: sunxi: convert driver to nand_scan()

[Miquel Raynal]

Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().

Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
---
 drivers/mtd/nand/raw/sunxi_nand.c | 38 ++++++++++++++------------------------
 1 file changed, 14 insertions(+), 24 deletions(-)

diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
index f5a55c63935c..5ca3c7b42373 100644
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -1971,12 +1971,21 @@ static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl *ecc)
 	}
 }
 
-static int sunxi_nand_ecc_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc,
-			       struct device_node *np)
+static int sunxi_nand_attach_chip(struct nand_chip *nand)
 {
-	struct nand_chip *nand = mtd_to_nand(mtd);
+	struct mtd_info *mtd = nand_to_mtd(nand);
+	struct nand_ecc_ctrl *ecc = &nand->ecc;
+	struct device_node *np = nand_get_flash_node(nand);
 	int ret;
 
+	if (nand->bbt_options & NAND_BBT_USE_FLASH)
+		nand->bbt_options |= NAND_BBT_NO_OOB;
+
+	if (nand->options & NAND_NEED_SCRAMBLING)
+		nand->options |= NAND_NO_SUBPAGE_WRITE;
+
+	nand->options |= NAND_SUBPAGE_READ;
+
 	if (!ecc->size) {
 		ecc->size = nand->ecc_step_ds;
 		ecc->strength = nand->ecc_strength_ds;
@@ -2103,30 +2112,11 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc,
 	mtd = nand_to_mtd(nand);
 	mtd->dev.parent = dev;
 
-	ret = nand_scan_ident(mtd, nsels, NULL);
+	nand->ecc.attach_chip = sunxi_nand_attach_chip;
+	ret = nand_scan(mtd, nsels);
 	if (ret)
 		return ret;
 
-	if (nand->bbt_options & NAND_BBT_USE_FLASH)
-		nand->bbt_options |= NAND_BBT_NO_OOB;
-
-	if (nand->options & NAND_NEED_SCRAMBLING)
-		nand->options |= NAND_NO_SUBPAGE_WRITE;
-
-	nand->options |= NAND_SUBPAGE_READ;
-
-	ret = sunxi_nand_ecc_init(mtd, &nand->ecc, np);
-	if (ret) {
-		dev_err(dev, "ECC init failed: %d\n", ret);
-		return ret;
-	}
-
-	ret = nand_scan_tail(mtd);
-	if (ret) {
-		dev_err(dev, "nand_scan_tail failed: %d\n", ret);
-		return ret;
-	}
-
 	ret = mtd_device_register(mtd, NULL, 0);
 	if (ret) {
 		dev_err(dev, "failed to register mtd device: %d\n", ret);
-- 
2.14.1