[PATCH 49/52] mtd: rawnand: qcom: convert driver to nand_scan()
Miquel Raynal
miquel.raynal at bootlin.com
Fri Mar 2 09:03:57 PST 2018
Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().
Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
---
drivers/mtd/nand/raw/qcom_nandc.c | 67 ++++++++++++---------------------------
1 file changed, 20 insertions(+), 47 deletions(-)
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index b554fb6e609c..d45b4e50e6a5 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -2315,10 +2315,10 @@ static const struct mtd_ooblayout_ops qcom_nand_ooblayout_ops = {
.free = qcom_nand_ooblayout_free,
};
-static int qcom_nand_host_setup(struct qcom_nand_host *host)
+static int qcom_nand_attach_chip(struct nand_chip *chip)
{
- struct nand_chip *chip = &host->chip;
struct mtd_info *mtd = nand_to_mtd(chip);
+ struct qcom_nand_host *host = to_qcom_nand_host(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
int cwperpage, bad_block_byte;
@@ -2623,9 +2623,9 @@ static int qcom_nandc_setup(struct qcom_nand_controller *nandc)
return 0;
}
-static int qcom_nand_host_init(struct qcom_nand_controller *nandc,
- struct qcom_nand_host *host,
- struct device_node *dn)
+static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc,
+ struct qcom_nand_host *host,
+ struct device_node *dn)
{
struct nand_chip *chip = &host->chip;
struct mtd_info *mtd = nand_to_mtd(chip);
@@ -2672,30 +2672,14 @@ static int qcom_nand_host_init(struct qcom_nand_controller *nandc,
/* set up initial status value */
host->status = NAND_STATUS_READY | NAND_STATUS_WP;
- ret = nand_scan_ident(mtd, 1, NULL);
- if (ret)
- return ret;
-
- ret = qcom_nand_host_setup(host);
-
- return ret;
-}
-
-static int qcom_nand_mtd_register(struct qcom_nand_controller *nandc,
- struct qcom_nand_host *host,
- struct device_node *dn)
-{
- struct nand_chip *chip = &host->chip;
- struct mtd_info *mtd = nand_to_mtd(chip);
- int ret;
-
- ret = nand_scan_tail(mtd);
+ chip->ecc.attach_chip = qcom_nand_attach_chip;
+ ret = nand_scan(mtd, 1);
if (ret)
return ret;
ret = mtd_device_register(mtd, NULL, 0);
if (ret)
- nand_cleanup(mtd_to_nand(mtd));
+ nand_cleanup(chip);
return ret;
}
@@ -2704,9 +2688,19 @@ static int qcom_probe_nand_devices(struct qcom_nand_controller *nandc)
{
struct device *dev = nandc->dev;
struct device_node *dn = dev->of_node, *child;
- struct qcom_nand_host *host, *tmp;
+ struct qcom_nand_host *host;
int ret;
+ if (nandc->props->is_bam) {
+ free_bam_transaction(nandc);
+ nandc->bam_txn = alloc_bam_transaction(nandc);
+ if (!nandc->bam_txn) {
+ dev_err(nandc->dev,
+ "failed to allocate bam transaction\n");
+ return -ENOMEM;
+ }
+ }
+
for_each_available_child_of_node(dn, child) {
host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
if (!host) {
@@ -2714,7 +2708,7 @@ static int qcom_probe_nand_devices(struct qcom_nand_controller *nandc)
return -ENOMEM;
}
- ret = qcom_nand_host_init(nandc, host, child);
+ ret = qcom_nand_host_init_and_register(nandc, host, child);
if (ret) {
devm_kfree(dev, host);
continue;
@@ -2723,27 +2717,6 @@ static int qcom_probe_nand_devices(struct qcom_nand_controller *nandc)
list_add_tail(&host->node, &nandc->host_list);
}
- if (list_empty(&nandc->host_list))
- return -ENODEV;
-
- if (nandc->props->is_bam) {
- free_bam_transaction(nandc);
- nandc->bam_txn = alloc_bam_transaction(nandc);
- if (!nandc->bam_txn) {
- dev_err(nandc->dev,
- "failed to allocate bam transaction\n");
- return -ENOMEM;
- }
- }
-
- list_for_each_entry_safe(host, tmp, &nandc->host_list, node) {
- ret = qcom_nand_mtd_register(nandc, host, child);
- if (ret) {
- list_del(&host->node);
- devm_kfree(dev, host);
- }
- }
-
if (list_empty(&nandc->host_list))
return -ENODEV;
--
2.14.1
More information about the linux-mtd
mailing list