[GIT PULL v2] mtd: nand: Changes for 4.16
Boris Brezillon
boris.brezillon at free-electrons.com
Sat Jan 20 07:25:26 PST 2018
Hello,
Here is the NAND PR for 4.16. As can be seen in the diffstat, the NAND
subsystem has been quite active. That's mainly caused by the
introduction of the ->exec_op() hook and the rework of the Marvell
driver.
Regards,
Boris
Changes in v2:
- Add a few fixes for the omap OneNAND and marvell NAND drivers
The following changes since commit 4fbd8d194f06c8a3fd2af1ce560ddb31f7ec8323:
Linux 4.15-rc1 (2017-11-26 16:01:47 -0800)
are available in the git repository at:
git://git.infradead.org/linux-mtd.git tags/nand/for-4.16
for you to fetch changes up to c1a72e2dbb4abb90bd408480d7c48ba40cb799ce:
mtd: nand: Fix build issues due to an anonymous union (2018-01-20 10:39:02 +0100)
----------------------------------------------------------------
Core changes:
* Fix NAND_CMD_NONE handling in nand_command[_lp]() hooks
* Introduce the ->exec_op() infrastructure
* Rework NAND buffers handling
* Fix ECC requirements for K9F4G08U0D
* Fix nand_do_read_oob() to return the number of bitflips
* Mark K9F1G08U0E as not supporting subpage writes
Driver changes:
* MTK: Rework the driver to support new IP versions
* OMAP OneNAND: Full rework to use new APIs (libgpio, dmaengine) and fix
DT support
* Marvell: Add a new driver to replace the pxa3xx one
----------------------------------------------------------------
Arnd Bergmann (1):
mtd: onenand: omap2: print resource using %pR format string
Boris Brezillon (6):
mtd: nand: hynix: Don't wait after applying new read-retry params
mtd: nand: provide several helpers to do common NAND operations
mtd: nand: force drivers to explicitly send READ/PROG commands
mtd: nand: denali: Avoid using ecc->code_buf as a temporary buffer
mtd: nand: Only allocate ecc->{calc, code}_buf when actually needed
Merge tag 'gpmc-omap-for-v4.16-immutable' of https://github.com/rogerq/linux into nand/next
Christophe JAILLET (5):
mtd: onenand: samsung: use devm_ function to simplify code and fix some leaks
mtd: onenand: samsung: return an error if 'mtd_device_parse_register()' fails
mtd: onenand: samsung: Propagate the error returned by 'onenand_scan()'
mtd: onenand: samsung: Remove a useless include
mtd: onenand: samsung: remove incorrect __iomem annotation
Colin Ian King (2):
mtd: nand: marvell: fix spelling mistake: "suceed"-> "succeed"
mtd: nand: marvell: remove redundant variable 'oob_len'
Fabio Estevam (2):
mtd: nand: brcmnand: Add a NULL check for devm_kasprintf()
mtd: nand: qcom: Add a NULL check for devm_kasprintf()
Gustavo A. R. Silva (1):
mtd: nand: gpmi: replace _manual_ swap with swap macro
Jagdish Gediya (1):
mtd: nand: ifc: update bufnum mask for ver >= 2.0.0
Jesse Chan (1):
mtd: nand: denali_pci: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
Kamal Dasu (1):
mtd: nand: brcmnand: Disable prefetch by default
Ladislav Michl (15):
memory: omap-gpmc: Make 'bank-width' property optional
mtd: onenand: Remove obsolete url from Kconfig help
mtd: nand: samsung: Disable subpage writes on E-die NAND
dt-bindings: mtd: gpmc-onenand: Update properties description
ARM: dts: OMAP2+: Add compatible property to onenand node
ARM: dts: omap3-igep: Update onenand node timings
mtd: onenand: omap2: Remove regulator support
mtd: onenand: omap2: Remove skip initial unlocking support
mtd: onenand: omap2: Remove partitioning support from platform data
mtd: onenand: omap2: Account waiting time as waiting on IO
mtd: onenand: omap2: Unify OMAP2 and OMAP3 DMA implementation
mtd: onenand: omap2: Do not make delay for GPIO OMAP3 specific
mtd: onenand: omap2: Decouple DMA enabling from INT pin availability
mtd: onenand: omap2: Configure driver from DT
ARM: OMAP2+: Remove gpmc-onenand
Masahiro Yamada (6):
mtd: nand: remove unnecessary extern from driver headers
mtd: nand: denali: rename misleading dma_buf to tmp_buf
mtd: nand: cafe: remove use of NAND_OWN_BUFFERS
mtd: nand: remove unused NAND_OWN_BUFFERS flag
mtd: nand: squash struct nand_buffers into struct nand_chip
mtd: nand: cafe: clean up DMA address setup
Miquel Raynal (15):
mtd: nand: fix interpretation of NAND_CMD_NONE in nand_command[_lp]()
mtd: nand: use usual return values for the ->erase() hook
mtd: nand: provide valid ->data_interface during NAND detection
mtd: nand: samsung: add ECC requirements for K9F4G08U0D
mtd: nand: add ->exec_op() implementation
mtd: nand: Fix unfinished comment in nand_init_data_interface()
mtd: mtd_oobtest: Handle bitflips during reads
mtd: nand: Fix nand_do_read_oob() return value
dt-bindings: mtd: document new nand-rb property
dt-bindings: mtd: add Marvell NAND controller documentation
mtd: nand: add reworked Marvell NAND controller driver
mtd: nand: use reworked NAND controller driver with Marvell EBU SoCs
MAINTAINERS: Add entry for Marvell NAND controller driver
mtd: nand: marvell: Fix missing memory allocation modifier
mtd: nand: Fix build issues due to an anonymous union
Nicolas Ferre (1):
MAINTAINERS: mtd/nand: update Microchip nand entry
Peter Ujfalusi (2):
mtd: onenand: omap2: Simplify the DMA setup for various paths
mtd: onenand: omap2: Convert to use dmaengine for memcpy
RogerCC Lin (3):
mtd: nand: mtk: update DT bindings
mtd: nand: mtk: Support different MTK NAND flash controller IP
mtd: nand: mtk: Support MT7622 NAND flash controller.
Sascha Hauer (2):
mtd: nand: gpmi-nand: Remove wrong Kconfig help text
mtd: tests: nandbiterrs: Fix read_page return value
Wei Yongjun (1):
mtd: onenand: omap2: Remove redundant dev_err call in omap2_onenand_probe()
Xiaolei Li (1):
mtd: nand: mtk: use nand_reset() to reset NAND devices in resume function
Documentation/devicetree/bindings/mtd/gpmc-onenand.txt | 6 +-
Documentation/devicetree/bindings/mtd/marvell-nand.txt | 123 ++
Documentation/devicetree/bindings/mtd/mtk-nand.txt | 11 +-
Documentation/devicetree/bindings/mtd/nand.txt | 1 +
MAINTAINERS | 22 +-
arch/arm/boot/dts/omap2420-n8x0-common.dtsi | 1 +
arch/arm/boot/dts/omap3-igep.dtsi | 30 +-
arch/arm/boot/dts/omap3-n900.dts | 1 +
arch/arm/boot/dts/omap3-n950-n9.dtsi | 1 +
arch/arm/boot/dts/omap3430-sdp.dts | 1 +
arch/arm/configs/mvebu_v7_defconfig | 2 +-
arch/arm/mach-omap2/Makefile | 3 -
arch/arm/mach-omap2/gpmc-onenand.c | 409 ------
arch/arm64/configs/defconfig | 2 +-
drivers/memory/omap-gpmc.c | 163 ++-
drivers/mtd/nand/Kconfig | 17 +-
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/atmel/nand-controller.c | 9 +-
drivers/mtd/nand/bf5xx_nand.c | 6 +-
drivers/mtd/nand/brcmnand/brcmnand.c | 38 +-
drivers/mtd/nand/cafe_nand.c | 52 +-
drivers/mtd/nand/denali.c | 84 +-
drivers/mtd/nand/denali.h | 4 +-
drivers/mtd/nand/denali_pci.c | 4 +
drivers/mtd/nand/diskonchip.c | 4 +-
drivers/mtd/nand/docg4.c | 21 +-
drivers/mtd/nand/fsl_elbc_nand.c | 10 +-
drivers/mtd/nand/fsl_ifc_nand.c | 13 +-
drivers/mtd/nand/fsmc_nand.c | 9 +-
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 97 +-
drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 46 +-
drivers/mtd/nand/hisi504_nand.c | 9 +-
drivers/mtd/nand/jz4740_nand.c | 16 +-
drivers/mtd/nand/lpc32xx_mlc.c | 7 +-
drivers/mtd/nand/lpc32xx_slc.c | 33 +-
drivers/mtd/nand/marvell_nand.c | 2896 +++++++++++++++++++++++++++++++++++++++++
drivers/mtd/nand/mtk_ecc.c | 126 +-
drivers/mtd/nand/mtk_ecc.h | 3 +-
drivers/mtd/nand/mtk_nand.c | 76 +-
drivers/mtd/nand/nand_base.c | 2230 ++++++++++++++++++++++++++-----
drivers/mtd/nand/nand_bbt.c | 2 +-
drivers/mtd/nand/nand_hynix.c | 129 +-
drivers/mtd/nand/nand_micron.c | 83 +-
drivers/mtd/nand/nand_samsung.c | 19 +
drivers/mtd/nand/nand_timings.c | 21 +-
drivers/mtd/nand/omap2.c | 28 +-
drivers/mtd/nand/pxa3xx_nand.c | 14 +-
drivers/mtd/nand/qcom_nandc.c | 30 +-
drivers/mtd/nand/r852.c | 11 +-
drivers/mtd/nand/sh_flctl.c | 6 +-
drivers/mtd/nand/sm_common.h | 2 +-
drivers/mtd/nand/sunxi_nand.c | 103 +-
drivers/mtd/nand/tango_nand.c | 27 +-
drivers/mtd/nand/tmio_nand.c | 5 +-
drivers/mtd/nand/vf610_nfc.c | 6 +-
drivers/mtd/onenand/Kconfig | 7 +-
drivers/mtd/onenand/omap2.c | 577 +++-----
drivers/mtd/onenand/samsung.c | 185 +--
drivers/mtd/tests/nandbiterrs.c | 2 +-
drivers/mtd/tests/oobtest.c | 21 +
drivers/staging/mt29f_spinand/mt29f_spinand.c | 5 +-
include/linux/mtd/rawnand.h | 443 ++++++-
include/linux/omap-gpmc.h | 28 +
include/linux/platform_data/mtd-onenand-omap2.h | 34 -
64 files changed, 6455 insertions(+), 1920 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mtd/marvell-nand.txt
delete mode 100644 arch/arm/mach-omap2/gpmc-onenand.c
create mode 100644 drivers/mtd/nand/marvell_nand.c
delete mode 100644 include/linux/platform_data/mtd-onenand-omap2.h
More information about the linux-mtd
mailing list