[PATCH v2] mtd: nand: samsung: Disable subpage writes on E-die NAND

[Ladislav Michl]

Samsung E-die SLC NAND manufactured using 21nm process (K9F1G08U0E)
does not support partial page programming, so disable subpage writes
for it. Manufacturing process is stored in lowest two bits of 5th ID
byte.

Signed-off-by: Ladislav Michl <ladis at linux-mips.org>
---
 Changes:
 - v2: 
   * Reword commit log
   * Check also for device type
   * Reimplement if statements using switch

 drivers/mtd/nand/nand_samsung.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/nand/nand_samsung.c b/drivers/mtd/nand/nand_samsung.c
index f6b0a63a068c..6971c35b78e9 100644
--- a/drivers/mtd/nand/nand_samsung.c
+++ b/drivers/mtd/nand/nand_samsung.c
@@ -92,10 +92,22 @@ static void samsung_nand_decode_id(struct nand_chip *chip)
 	} else {
 		nand_decode_ext_id(chip);
 
-		/* Datasheet values for SLC Samsung K9F4G08U0D-S[I|C]B0(T00) */
-		if (nand_is_slc(chip) && chip->id.data[1] == 0xDC) {
-			chip->ecc_step_ds = 512;
-			chip->ecc_strength_ds = 1;
+		if (nand_is_slc(chip)) {
+			switch (chip->id.data[1]) {
+			/* K9F4G08U0D-S[I|C]B0(T00) */
+			case 0xDC:
+				chip->ecc_step_ds = 512;
+				chip->ecc_strength_ds = 1;
+				break;
+			/* K9F1G08U0E 21nm chips do not support subpage write */
+			case 0xF1:
+				if (chip->id.len > 4 &&
+				    (chip->id.data[4] & GENMASK(1,0)) == 0x1)
+					chip->options |= NAND_NO_SUBPAGE_WRITE;
+				break;
+			default:
+				break;
+			}
 		}
 	}
 }
-- 
2.15.1