[PATCH v3 0/7] Marvell NAND controller rework with ->exec_op()

Miquel Raynal miquel.raynal at free-electrons.com
Tue Jan 9 02:36:30 PST 2018


Hi,

After the addition of the NAND framework ->exec_op() interface (see [1]
for the series preparing it and [2] for the last version of the
core-side implementation of ->exec_op() itself), this series replaces
the current Marvell NAND controller driver pxa3xx_nand.c with a rework
called marvell_nand.c.

Aside the fact that it drops the big state machine, improves the overall
speed and implements raw accesses, it is the first driver-side
implementation of the ->exec_op() interface and may be used as reference
for latter reworks of the same type.

One may find more detail about why a completely new driver is needed in
the commit log of:

    "mtd: nand: add reworked Marvell NAND controller driver"

Device tree NAND node definition for all platforms referring to the
Marvell driver using the new bindings have already been accepted by the
MVEBU DT maintainers and will be merged after the driver. They are more
hierarchical and fit the real organization of the hardware, by having
NAND partitions that are part of NAND chip nodes, themselves part of the
NAND controller node.

These changes have been tested on:
   - PXA3xx platform with a CM-X300 board (2kiB page NAND, 1b/512B
     strength, Hamming ECC engine) [32 bits]
   - Armada 385 DB AP (4kiB page NAND, 4b/512B, BCH ECC engine) [32 bits]
   - Armada 398 DB (4kiB page NAND, 8b/512B, BCH ECC engine using a layout
     with a last chunk different than the others) [32 bits]
   - Armada 7040 DB and Armada 8040 DB (4kiB page NAND, 4b/512B, BCH ECC
     engine) [64 bits]
   - Triax dvb-tc board (2kiB page NAND, 4b/512B, BCH ECC engine) [32 bits]

This version is known not to be stable yet with a Zylonite based setup but
otherwise looks good for Marvell EBU platforms.

For people who would like to test it easily, a branch ready to be tested
is available at [3]. It is based on nand/next and has all the changes
brought by the previously mentionned series as well as this one.

Thank you,
Miquèl


[1] https://www.spinics.net/lists/arm-kernel/msg619633.html
[2] http://lists.infradead.org/pipermail/linux-mtd/2017-December/077965.html
[3] https://github.com/miquelraynal/linux/tree/marvell/nand-next/nfc


Changes since v2:
  - Added a patch to create the nand-rb property in the Documentation
  - Rewording in the Documentation according to Rob's comments
  - Moved from marvell,rb to nand-rb property in the code
  - Disociated using this driver with Marvell EBU platforms than using
    it with PXA ones
  - Fixed the handling of 16-bit buses
  - Fixed SPDX comment style
  - Reorganized registers offsets/bit fields definitions as requested
  - Moved to Kernel doc
  - Changed the logic in ->select_chip() to use a prepared value of NDCR
    only instead of recalculating it
  - Fixed the presence of the SPARE_EN bit, reworked a bit the
    hmg_do_read/write() helpers
  - Fixed the OOB layouts that were unusable (all spare data first, then
    all ECC bytes)
  - Additional check on mtd->writesize when using NFCv1 (all sizes not
    supported)
  - Various typos/rewording

Changes since v1:
  - Rewording
  - Fixed BCH ->read/write_page() hooks for 2kiB pages NAND chips
  - Removed license text, used SPDX tag instead
  - Removed read_page_data()
  - Enhanced the DT bindings document with the label property and the
    deprecated bindings.
  - Simplified the read_chunk() helper (OOB always read).
  - Simplified the ->bch_read_page() hook by removing the addition raw
    read to get ECC bytes.
  - Fixed the ->correct() function that did not check for bitflips in
    ECC bytes in erased pages.


Miquel Raynal (7):
  dt-bindings: mtd: document new nand-rb property
  dt-bindings: mtd: add Marvell NAND controller documentation
  mtd: nand: add reworked Marvell NAND controller driver
  mtd: nand: use reworked NAND controller driver with Marvell EBU SoCs
  mtd: nand: use Marvell reworked NAND controller driver with all
    platforms
  dt-bindings: mtd: remove pxa3xx NAND controller documentation
  mtd: nand: remove useless fields from pxa3xx NAND platform data

 .../devicetree/bindings/mtd/marvell-nand.txt       |  123 +
 Documentation/devicetree/bindings/mtd/nand.txt     |    1 +
 .../devicetree/bindings/mtd/pxa3xx-nand.txt        |   50 -
 arch/arm/configs/cm_x300_defconfig                 |    2 +-
 arch/arm/configs/mvebu_v7_defconfig                |    2 +-
 arch/arm/configs/pxa3xx_defconfig                  |    3 +-
 arch/arm/configs/pxa_defconfig                     |    2 +-
 arch/arm/configs/raumfeld_defconfig                |    2 +-
 arch/arm/mach-mmp/ttc_dkb.c                        |    4 +-
 arch/arm/mach-pxa/cm-x300.c                        |    8 +-
 arch/arm/mach-pxa/colibri-pxa3xx.c                 |    8 +-
 arch/arm/mach-pxa/colibri.h                        |    2 +-
 arch/arm/mach-pxa/littleton.c                      |   10 +-
 arch/arm/mach-pxa/mxm8x10.c                        |   10 +-
 arch/arm/mach-pxa/raumfeld.c                       |    6 +-
 arch/arm/mach-pxa/zylonite.c                       |   10 +-
 arch/arm64/configs/defconfig                       |    2 +-
 drivers/mtd/nand/Kconfig                           |   18 +-
 drivers/mtd/nand/Makefile                          |    2 +-
 drivers/mtd/nand/marvell_nand.c                    | 2896 ++++++++++++++++++++
 drivers/mtd/nand/pxa3xx_nand.c                     | 2104 --------------
 include/linux/platform_data/mtd-nand-pxa3xx.h      |   43 +-
 22 files changed, 3072 insertions(+), 2236 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/marvell-nand.txt
 delete mode 100644 Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
 create mode 100644 drivers/mtd/nand/marvell_nand.c
 delete mode 100644 drivers/mtd/nand/pxa3xx_nand.c

-- 
2.11.0




More information about the linux-mtd mailing list