[PATCH v3 10/11] mtd: rawnand: lpc32xx_slc: clean the probe function

[Boris Brezillon]

On Sat, 21 Apr 2018 20:00:42 +0200
Miquel Raynal <miquel.raynal at bootlin.com> wrote:

> Before fixing the error path of the probe function, fix the style of the
> entire function and particularly the goto labels: they should indicate
> what the next cleanup to do is.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
> ---
>  drivers/mtd/nand/raw/lpc32xx_slc.c | 26 ++++++++++++++------------
>  1 file changed, 14 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/lpc32xx_slc.c b/drivers/mtd/nand/raw/lpc32xx_slc.c
> index 5f7cc6da0a7f..342f666ad435 100644
> --- a/drivers/mtd/nand/raw/lpc32xx_slc.c
> +++ b/drivers/mtd/nand/raw/lpc32xx_slc.c
> @@ -831,11 +831,11 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
>  	if (IS_ERR(host->clk)) {
>  		dev_err(&pdev->dev, "Clock failure\n");
>  		res = -ENOENT;
> -		goto err_exit1;
> +		goto release_gpio;
>  	}
>  	res = clk_prepare_enable(host->clk);
>  	if (res)
> -		goto err_exit1;
> +		goto release_gpio;
>  
>  	/* Set NAND IO addresses and command/ready functions */
>  	chip->IO_ADDR_R = SLC_DATA(host->io_base);
> @@ -874,19 +874,19 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
>  				      GFP_KERNEL);
>  	if (host->data_buf == NULL) {
>  		res = -ENOMEM;
> -		goto err_exit2;
> +		goto release_clk;
>  	}
>  
>  	res = lpc32xx_nand_dma_setup(host);
>  	if (res) {
>  		res = -EIO;
> -		goto err_exit2;
> +		goto release_clk;
>  	}
>  
>  	/* Find NAND device */
>  	res = nand_scan_ident(mtd, 1, NULL);
>  	if (res)
> -		goto err_exit3;
> +		goto release_dma;
>  
>  	/* OOB and ECC CPU and DMA work areas */
>  	host->ecc_buf = (uint32_t *)(host->data_buf + LPC32XX_DMA_DATA_SIZE);
> @@ -920,21 +920,23 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
>  	 */
>  	res = nand_scan_tail(mtd);
>  	if (res)
> -		goto err_exit3;
> +		goto release_dma;
>  
>  	mtd->name = "nxp_lpc3220_slc";
>  	res = mtd_device_register(mtd, host->ncfg->parts,
>  				  host->ncfg->num_parts);
> -	if (!res)
> -		return res;
> +	if (res)
> +		goto release_nand;
>  
> +	return 0;
> +
> +release_nand:
>  	nand_release(mtd);
> -
> -err_exit3:
> +release_dma:
>  	dma_release_channel(host->dma_chan);
> -err_exit2:
> +release_clk:

You mean unprepare_clk.

>  	clk_disable_unprepare(host->clk);
> -err_exit1:
> +release_gpio:

And I'd go for enable_wp here since it's not releasing the gpio at all.

No need to resend, I'll fix it when applying

>  	lpc32xx_wp_enable(host);
>  
>  	return res;