[PATCH 05/13] mtd: nand: gpmi: return valid value from bch_set_geometry()

[Sam Lefebvre]

From: Sascha Hauer <s.hauer at pengutronix.de>

The caller of bch_set_geometry() expects the return value to
be an error code, so !0 is not valid. return the error from the
just called function instead.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout at mind.be>
---
v2: rebased
---
 drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c
index 39834bedf460..83697b8df871 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c
@@ -258,8 +258,9 @@ int bch_set_geometry(struct gpmi_nand_data *this)
 	unsigned int gf_len;
 	int ret;
 
-	if (common_nfc_set_geometry(this))
-		return !0;
+	ret = common_nfc_set_geometry(this);
+	if (ret)
+		return ret;
 
 	block_count   = bch_geo->ecc_chunk_count - 1;
 	block_size    = bch_geo->ecc_chunk_size;
-- 
2.14.1