[PATCH] mtd: Add sysfs attribute for mtd OOB available size

[xiaolei li]

On Wed, 2018-04-04 at 22:05 +0200, Boris Brezillon wrote:
> On Tue, 3 Apr 2018 19:01:03 +0800
> xiaolei li <xiaolei.li at mediatek.com> wrote:
> 
> > On Tue, 2018-04-03 at 12:14 +0200, Boris Brezillon wrote:
> > > On Tue, 3 Apr 2018 17:40:11 +0800
> > > xiaolei li <xiaolei.li at mediatek.com> wrote:
> > >   
> > > > On Tue, 2018-04-03 at 10:43 +0200, Boris Brezillon wrote:  
> > > > > On Tue, 3 Apr 2018 10:46:58 +0800
> > > > > xiaolei li <xiaolei.li at mediatek.com> wrote:
> > > > >     
> > > > > > Hello Boris,
> > > > > > 
> > > > > > On Mon, 2018-04-02 at 14:15 +0200, Boris Brezillon wrote:    
> > > > > > > Hi Xiaolei,
> > > > > > > 
> > > > > > > On Mon, 2 Apr 2018 16:20:10 +0800
> > > > > > > Xiaolei Li <xiaolei.li at mediatek.com> wrote:
> > > > > > >       
> > > > > > > > Expose mtd OOB available size by sysfs file. Then users can get available
> > > > > > > > OOB size by accessing /sys/class/mtd/mtdX/oobavail.      
> > > > > > > 
> > > > > > > May I ask why you need to expose that? I'm not against exposing new
> > > > > > > things through sysfs, but since this is part of the ABI, I'd like to be
> > > > > > > sure we actually need it.
> > > > > > >       
> > > > > > That is user-space can write OOB data through ioctl MEMWRITE now.
> > > > > > If OOB operation mode is MTD_OPS_AUTO_OOB, user should know how many
> > > > > > OOB available bytes it can use. But I didn't find a way to get it. (If
> > > > > > there is already a method, please kindly let me know, thanks.)    
> > > > > 
> > > > > Nope. We have the ECCGETLAYOUT ioctl, but it's not reliable because of
> > > > > the MTD_MAX_OOBFREE_ENTRIES limitation.
> > > > >     
> > > > > > 
> > > > > > One problem I know is to do Jffs2 type flash erase using MTD user-space
> > > > > > tool flash_erase. flash_erase tool will program "cleanmarker" into OOB
> > > > > > free area, but it can not get OOB available size.    
> > > > > 
> > > > > That's a good reason to expose this property indeed. Do you plan to fix
> > > > > mtd-utils to use the sysfs value when it's available? Also, do we need
> > > > > to expose the ECC/free layout as done with the
> > > > > ECCGETLAYOUT/MEMGETOOBSEL ioctls?
> > > > >     
> > > > Yes. I plan to fix mtd-utils problem if this change is accepted.
> > > > 
> > > > struct nand_oobinfo and struct nand_ecclayout_user in mtd-abi.h are
> > > > obsoleted, and user can not get oob layout by ioctl method now.
> > > > sysfs seems a method to fetch oob layout. But I don't know which
> > > > user-space case will use oob layout now. Maybe expose them in the future
> > > > if they are really needed?  
> > > 
> > > If the layout is not needed yet, let's not expose it. BTW, are you
> > > really using JFFS2 on modern NAND chips? Sounds like a bad idea to me.  
> > Yes. I tested Micron SLC NAND with 4K page size and 224 OOB size these
> > days. Jffs2 runs good on this NAND.
> 
> Yes, it should work, but I'm not sure JFFS2 scales well on >128MB
> NANDs, and people tend to use UBI on such devices nowadays (this + the
> fact that JFFS2 is not actively maintained).
Yes.
> 
> Anyway, I guess your change is acceptable, I'd just like to see
> patches for mtd-utils using this sysfs entry now ;-).
OK. Thanks. I will send mtd-utils patches ASAP.
> 
> Regards,
> 
> Boris