[PATCH 3/3] arm64: dts: marvell: add NAND support on the 7040-DB board

[Gregory CLEMENT]

Hi Miquel,
 
 On lun., sept. 25 2017, Miquel Raynal <miquel.raynal at free-electrons.com> wrote:

> From: Gregory CLEMENT <gregory.clement at free-electrons.com>
>
> The NAND controller used in A7K/A8K is present on the CP110 master part.
> It is compatible with the pxa3xx_nand driver but requires the use of the
> marvell,armada-8k-nand compatible string due to the need to first enable
> the NAND controller.
>
> Add properties to the NAND node to fit the bindings constraints of the
> pxa3xx_nand driver and enable the NAND controller.
>
> Add the 'marvell,system-controller' property to the cp110 master NAND
> node with a reference to the syscon node. This is new compared to other
> boards using the pxa3xx_nand driver and it is needed to be bootloader
> independent and enable the NAND controller from the NAND controller
> driver itself by writing in these syscon registers.
>
> Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
> [miquel.raynal at free-electrons.com: add NAND ready/busy MPP subnode,
> change compatible string to fit the needs of the A7k/A8k SoCs and add
> the system controller property]
> Signed-off-by: Miquel Raynal <miquel.raynal at free-electrons.com>
> ---
>  arch/arm64/boot/dts/marvell/armada-7040-db.dts     | 24 ++++++++++++++++++++++
>  arch/arm64/boot/dts/marvell/armada-70x0.dtsi       | 14 +++++++++++++
>  .../boot/dts/marvell/armada-cp110-master.dtsi      |  3 ++-
>  3 files changed, 40 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
> index 9c3bdf87e543..b98cf265bae5 100644
> --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
> @@ -144,6 +144,30 @@
>  	};
>  };
>  
> +&cpm_nand {
> +	status = "okay";
> +	num-cs = <1>;
> +	pinctrl-0 = <&nand_pins>, <&nand_rb>;
> +	pinctrl-names = "default";
> +	nand-ecc-strength = <4>;
> +	nand-ecc-step-size = <512>;
> +	marvell,nand-enable-arbiter;
> +	nand-on-flash-bbt;
> +
> +	partition at 0 {
> +		label = "U-Boot";
> +		reg = <0 0x200000>;
> +	};
> +	partition at 200000 {
> +		label = "Linux";
> +		reg = <0x200000 0xe00000>;
> +	};
> +	partition at 1000000 {
> +		label = "Filesystem";
> +		reg = <0x1000000 0x3f000000>;
> +	};
> +};
> +
>  &cpm_spi1 {
>  	status = "okay";
>  
> diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
> index 860b6ae9dcc5..0e1a1e5be399 100644
> --- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
> @@ -64,5 +64,19 @@
>  &cpm_syscon0 {
>  	cpm_pinctrl: pinctrl {
>  		compatible = "marvell,armada-7k-pinctrl";
> +
> +		nand_pins: nand-pins {
> +			marvell,pins =
> +			"mpp15", "mpp16", "mpp17", "mpp18",
> +			"mpp19", "mpp20", "mpp21", "mpp22",
> +			"mpp23", "mpp24", "mpp25", "mpp26",
> +			"mpp27";
> +			marvell,function = "dev";
> +		};
> +
> +		nand_rb: nand-rb {
> +			marvell,pins = "mpp13";
> +			marvell,function = "nf";
> +		};
>  	};
>  };
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> index 8263a8a504a8..d41b41b613ec 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> @@ -274,12 +274,13 @@
>  				 * this controller is only usable on the CPM
>  				 * for A7K and on the CPS for A8K.
>  				 */
> -				compatible = "marvell,armada370-nand";
> +				compatible = "marvell,armada-8k-nand";

the controller on cp110 remains compatible with the one on Armada 370
(even if it needs more initialization steps), so we should keep it also
and having instead the following line:

compatible = "marvell,armada-8k-nand", "marvell,armada370-nand";

You don't have to send a new version, unless someone is against it, I
will amend it when applying on the mvebu branches.

Thanks,

Gregory


>  				reg = <0x720000 0x54>;
>  				#address-cells = <1>;
>  				#size-cells = <1>;
>  				interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>;
>  				clocks = <&cpm_clk 1 2>;
> +				marvell,system-controller = <&cpm_syscon0>;
>  				status = "disabled";
>  			};
>  
> -- 
> 2.11.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com