[PATCH] dt-bindings: nand: denali: reduce the register space in the example

[Oleksij Rempel]

Hi,

i assume arch/arm/boot/dts/socfpga.dtsi should be update as well. Right?

On 14.09.2017 09:17, Masahiro Yamada wrote:
> This example allocates too much for register regions.  Especially,
> there are only two registers in the "nand_data" interface of this
> hardware (ADDR: 0x00, DATA: 0x10).
> 
> Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
> ---
> 
>   Documentation/devicetree/bindings/mtd/denali-nand.txt | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt
> index 504291d..0ee8edb 100644
> --- a/Documentation/devicetree/bindings/mtd/denali-nand.txt
> +++ b/Documentation/devicetree/bindings/mtd/denali-nand.txt
> @@ -29,7 +29,7 @@ nand: nand at ff900000 {
>   	#address-cells = <1>;
>   	#size-cells = <1>;
>   	compatible = "altr,socfpga-denali-nand";
> -	reg = <0xff900000 0x100000>, <0xffb80000 0x10000>;
> +	reg = <0xff900000 0x20>, <0xffb80000 0x1000>;
>   	reg-names = "nand_data", "denali_reg";
>   	interrupts = <0 144 4>;
>   };
>