[RESEND PATCH] mtd: nand: omap2: Remove omap_nand_platform_data
Boris Brezillon
boris.brezillon at free-electrons.com
Thu Oct 12 04:38:37 PDT 2017
On Thu, 12 Oct 2017 14:28:45 +0300
Roger Quadros <rogerq at ti.com> wrote:
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
>
> On 10/10/17 12:40, Boris Brezillon wrote:
> > On Fri, 6 Oct 2017 12:35:43 +0200
> > Ladislav Michl <ladis at linux-mips.org> wrote:
> >
> >> As driver is now configured using DT, omap_nand_platform_data structure
> >> is no longer needed.
> >>
> >> Signed-off-by: Ladislav Michl <ladis at linux-mips.org>
> >> ---
> >> Resend to linux-mtd as other part this patch was depending on
> >> was merged months ago via linux-omap tree...
> >>
> >> drivers/mtd/nand/omap2.c | 40 +++++++---------------------
> >> include/linux/platform_data/mtd-nand-omap2.h | 17 ------------
> >> 2 files changed, 10 insertions(+), 47 deletions(-)
> >>
> >> diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
> >> index 54540c8fa1a2..b1fc070c8279 100644
> >> --- a/drivers/mtd/nand/omap2.c
> >> +++ b/drivers/mtd/nand/omap2.c
> >> @@ -1588,8 +1588,7 @@ static bool is_elm_present(struct omap_nand_info *info,
> >> return true;
> >> }
> >>
> >> -static bool omap2_nand_ecc_check(struct omap_nand_info *info,
> >> - struct omap_nand_platform_data *pdata)
> >> +static bool omap2_nand_ecc_check(struct omap_nand_info *info)
> >> {
> >> bool ecc_needs_bch, ecc_needs_omap_bch, ecc_needs_elm;
> >>
> >> @@ -1804,7 +1803,6 @@ static const struct mtd_ooblayout_ops omap_sw_ooblayout_ops = {
> >> static int omap_nand_probe(struct platform_device *pdev)
> >> {
> >> struct omap_nand_info *info;
> >> - struct omap_nand_platform_data *pdata = NULL;
> >> struct mtd_info *mtd;
> >> struct nand_chip *nand_chip;
> >> int err;
> >> @@ -1814,6 +1812,9 @@ static int omap_nand_probe(struct platform_device *pdev)
> >> int min_oobbytes = BADBLOCK_MARKER_LENGTH;
> >> int oobbytes_per_step;
> >>
> >> + if (!dev->of_node)
> >> + return -EINVAL;
> >> +
> >
> > Is this really needed? I expect omap_get_dt_info() to return an error
> > when dev->of_node is NULL.
> >
> >> info = devm_kzalloc(&pdev->dev, sizeof(struct omap_nand_info),
> >> GFP_KERNEL);
> >> if (!info)
> >> @@ -1821,29 +1822,9 @@ static int omap_nand_probe(struct platform_device *pdev)
> >>
> >> info->pdev = pdev;
> >>
> >> - if (dev->of_node) {
> >> - if (omap_get_dt_info(dev, info))
> >> - return -EINVAL;
> >> - } else {
> >> - pdata = dev_get_platdata(&pdev->dev);
> >> - if (!pdata) {
> >> - dev_err(&pdev->dev, "platform data missing\n");
> >> - return -EINVAL;
> >> - }
> >> -
> >> - info->gpmc_cs = pdata->cs;
> >> - info->reg = pdata->reg;
> >> - info->ecc_opt = pdata->ecc_opt;
> >> - if (pdata->dev_ready)
> >> - dev_info(&pdev->dev, "pdata->dev_ready is deprecated\n");
> >> -
> >> - info->xfer_type = pdata->xfer_type;
> >> - info->devsize = pdata->devsize;
> >> - info->elm_of_node = pdata->elm_of_node;
> >> - info->flash_bbt = pdata->flash_bbt;
> >> - }
> >> + if (omap_get_dt_info(dev, info))
> >> + return -EINVAL;
>
> how about
>
> err = omap_get_dt_info(dev, info);
> if (err)
> return err;
Already done like that in v2 [1]
>
> >>
> >> - platform_set_drvdata(pdev, info);
> >
> > This removal seems unrelated to the change you're describing in the
> > commit log. I'm not saying we should keep this platform_set_drvdata()
> > if it's useless, but it should be done in a separate patch.
>
> we do use platform_get_drvdata() in omap_nand_remove() so I suppose
> we can't get rid of platorm_set_drvdata().
There's another platform_set_drvdata() later in the probe function, I
think this one is indeed useless (see patch [2])
[1]http://patchwork.ozlabs.org/patch/823820/
[2]http://patchwork.ozlabs.org/patch/823839/
More information about the linux-mtd
mailing list