[PATCH] ARM: pxa: cm-x255: Fix up GPIO NAND device name in table

[Linus Walleij]

My patch set the device name wrong because I confused the
device name for a partition name. Sorry.

Cc: arm at kernel.org
Fixes: ("mtd: nand: gpio: Convert to use GPIO descriptors")
Reported-by: Robert Jarzmik <robert.jarzmik at free.fr>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
This can be squashed into the commit or applied on top
as a fix. The original patch was ACKed by the ARM SoC
maintainers so I believe this is fine to apply.
---
 arch/arm/mach-pxa/cm-x255.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
index f8d67acb7194..fa8e7dd4d898 100644
--- a/arch/arm/mach-pxa/cm-x255.c
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -178,7 +178,7 @@ static inline void cmx255_init_nor(void) {}
 #if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
 
 static struct gpiod_lookup_table cmx255_nand_gpiod_table = {
-	.dev_id         = "cmx255-nand",
+	.dev_id         = "gpio-nand",
 	.table          = {
 		GPIO_LOOKUP("gpio-pxa", GPIO_NAND_CS, "nce", GPIO_ACTIVE_HIGH),
 		GPIO_LOOKUP("gpio-pxa", GPIO_NAND_CLE, "cle", GPIO_ACTIVE_HIGH),
-- 
2.13.5