[PATCH v2] mtd: nand: Fix writing mtdoops to nand flash.

Boris Brezillon boris.brezillon at free-electrons.com
Thu Nov 2 03:48:06 PDT 2017


On Mon, 30 Oct 2017 22:32:45 -0500
motobud at gmail.com wrote:

> From: Brent Taylor <motobud at gmail.com>
> 
> When mtdoops calls mtd_panic_write, it eventually calls
> panic_nand_write in nand_base.c.  In order to properly
> wait for the nand chip to be ready in panic_nand_wait,
> the chip must first be selected.
> 
> When using the atmel nand flash controller, a panic
> would occur due to a NULL pointer exception.
> 

Applied.

Thanks,

Boris

> Signed-off-by: Brent Taylor <motobud at gmail.com>
> ---
> Changes in v2:
>   - drop deselecting the chip
>   - move select_chip and panic_nand_wait after panic_nand_get_device
> 
>  drivers/mtd/nand/nand_base.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
> index 12edaae17d81..2093667e2bcb 100644
> --- a/drivers/mtd/nand/nand_base.c
> +++ b/drivers/mtd/nand/nand_base.c
> @@ -2802,12 +2802,16 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
>  	struct mtd_oob_ops ops;
>  	int ret;
>  
> -	/* Wait for the device to get ready */
> -	panic_nand_wait(mtd, chip, 400);
> +	int chipnr = (int)(to >> chip->chip_shift);
>  
>  	/* Grab the device */
>  	panic_nand_get_device(chip, mtd, FL_WRITING);
>  
> +	chip->select_chip(mtd, chipnr);
> +
> +	/* Wait for the device to get ready */
> +	panic_nand_wait(mtd, chip, 400);
> +
>  	memset(&ops, 0, sizeof(ops));
>  	ops.len = len;
>  	ops.datbuf = (uint8_t *)buf;




More information about the linux-mtd mailing list