pxa3xx-nand failing to find device on linux-next

[Boris Brezillon]

On Wed, 24 May 2017 13:23:01 +0200
Boris Brezillon <boris.brezillon at free-electrons.com> wrote:

> Hi Chris,
> 
> On Wed, 24 May 2017 09:36:56 +0000
> Chris Packham <Chris.Packham at alliedtelesis.co.nz> wrote:
> 
> > On 23/05/17 17:27, Chris Packham wrote:  
> > > Hi,
> > >
> > > I'm doing some testing on linux-next and I'm finding that my nand flash
> > > has disappeared.
> > >
> > > pxa3xx-nand f10d0000.flash: This platform can't do DMA on this device
> > > pxa3xx-nand f10d0000.flash: non-supported command ef
> > > pxa3xx-nand f10d0000.flash: non-supported command ee
> > > pxa3xx-nand f10d0000.flash: non-supported command ef
> > > pxa3xx-nand f10d0000.flash: non-supported command ee
> > > On-die ECC forcefully enabled, not supported
> > > nand: No NAND device found
> > > pxa3xx-nand f10d0000.flash: failed to scan nand at cs 0
> > >
> > > This was working around 4.11. I'll try to do some more digging tomorrow
> > > to narrow down a failure point but I thought I'd send this out now just
> > > in case it rings any bells.
> > >
> > > The board I'm using (DB-88F6820-AMC) is unfortunately out-of tree but it
> > > should be pretty close to the armada-388-db. I can make my dts available
> > > if it's helpful.    
> > 
> > Still works on 4.12-rc2. Fails on next-20170524.
> > 
> > This appears to be due to commit b566d9c055de ("mtd: nand: add support 
> > for Micron on-die ECC"). Which based on the description seems intentional.
> > 
> > Since I have access to a hardware platform that has a micron flash with
> > ECC forcefully enabled how can I help to get this implemented.  
> 
> Can you try with this patch applied [1]?

Sorry, wrong patch. Can you try this one [1] instead?

[1]http://code.bulix.org/pkfhmi-135875