[PATCH v6 14/15] nand: spi: Add generic SPI controller support
Peter Pan
peterpandong at micron.com
Wed May 24 00:07:10 PDT 2017
This commit supports to use generic spi controller
as spi nand controller.
Signed-off-by: Peter Pan <peterpandong at micron.com>
---
drivers/mtd/nand/spi/Kconfig | 2 +
drivers/mtd/nand/spi/Makefile | 1 +
drivers/mtd/nand/spi/controllers/Kconfig | 5 +
drivers/mtd/nand/spi/controllers/Makefile | 1 +
drivers/mtd/nand/spi/controllers/generic-spi.c | 162 +++++++++++++++++++++++++
5 files changed, 171 insertions(+)
create mode 100644 drivers/mtd/nand/spi/controllers/Kconfig
create mode 100644 drivers/mtd/nand/spi/controllers/Makefile
create mode 100644 drivers/mtd/nand/spi/controllers/generic-spi.c
diff --git a/drivers/mtd/nand/spi/Kconfig b/drivers/mtd/nand/spi/Kconfig
index d77c46e..6bd1c65 100644
--- a/drivers/mtd/nand/spi/Kconfig
+++ b/drivers/mtd/nand/spi/Kconfig
@@ -3,3 +3,5 @@ menuconfig MTD_SPI_NAND
depends on MTD_NAND
help
This is the framework for the SPI NAND device drivers.
+
+source "drivers/mtd/nand/spi/controllers/Kconfig"
diff --git a/drivers/mtd/nand/spi/Makefile b/drivers/mtd/nand/spi/Makefile
index df6c2ea..822e48d 100644
--- a/drivers/mtd/nand/spi/Makefile
+++ b/drivers/mtd/nand/spi/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_MTD_SPI_NAND) += core.o
obj-$(CONFIG_MTD_SPI_NAND) += micron.o
+obj-$(CONFIG_MTD_SPI_NAND) += controllers/
diff --git a/drivers/mtd/nand/spi/controllers/Kconfig b/drivers/mtd/nand/spi/controllers/Kconfig
new file mode 100644
index 0000000..8ab7023
--- /dev/null
+++ b/drivers/mtd/nand/spi/controllers/Kconfig
@@ -0,0 +1,5 @@
+config GENERIC_SPI_NAND
+ tristate "SPI NAND with generic SPI bus Support"
+ depends on MTD_SPI_NAND && SPI
+ help
+ This is to support SPI NAND device with generic SPI bus.
diff --git a/drivers/mtd/nand/spi/controllers/Makefile b/drivers/mtd/nand/spi/controllers/Makefile
new file mode 100644
index 0000000..46cbf29
--- /dev/null
+++ b/drivers/mtd/nand/spi/controllers/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_GENERIC_SPI_NAND) += generic-spi.o
diff --git a/drivers/mtd/nand/spi/controllers/generic-spi.c b/drivers/mtd/nand/spi/controllers/generic-spi.c
new file mode 100644
index 0000000..93ccafc
--- /dev/null
+++ b/drivers/mtd/nand/spi/controllers/generic-spi.c
@@ -0,0 +1,162 @@
+/*
+ * Copyright (c) 2016-2017 Micron Technology, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/mtd/spinand.h>
+#include <linux/mtd/mtd.h>
+
+struct gen_spi_spinand_controller {
+ struct spinand_controller ctrl;
+ struct spi_device *spi;
+};
+
+#define to_gen_spi_spinand_controller(c) \
+ container_of(c, struct gen_spi_spinand_controller, ctrl)
+
+/*
+ * gen_spi_spinand_exec_op - to process a command to send to the
+ * SPI NAND by generic SPI bus
+ * @spinand: SPI NAND device structure
+ * @op: SPI NAND operation descriptor
+ */
+static int gen_spi_spinand_exec_op(struct spinand_device *spinand,
+ struct spinand_op *op)
+{
+ struct spi_message message;
+ struct spi_transfer x[3];
+ struct spinand_controller *spinand_controller;
+ struct gen_spi_spinand_controller *controller;
+
+ spinand_controller = spinand->controller.controller;
+ controller = to_gen_spi_spinand_controller(spinand_controller);
+ spi_message_init(&message);
+ memset(x, 0, sizeof(x));
+ x[0].len = 1;
+ x[0].tx_nbits = 1;
+ x[0].tx_buf = &op->cmd;
+ spi_message_add_tail(&x[0], &message);
+
+ if (op->n_addr + op->dummy_bytes) {
+ x[1].len = op->n_addr + op->dummy_bytes;
+ x[1].tx_nbits = op->addr_nbits;
+ x[1].tx_buf = op->addr;
+ spi_message_add_tail(&x[1], &message);
+ }
+
+ if (op->n_tx) {
+ x[2].len = op->n_tx;
+ x[2].tx_nbits = op->data_nbits;
+ x[2].tx_buf = op->tx_buf;
+ spi_message_add_tail(&x[2], &message);
+ } else if (op->n_rx) {
+ x[2].len = op->n_rx;
+ x[2].rx_nbits = op->data_nbits;
+ x[2].rx_buf = op->rx_buf;
+ spi_message_add_tail(&x[2], &message);
+ }
+
+ return spi_sync(controller->spi, &message);
+}
+
+static struct spinand_controller_ops gen_spi_spinand_ops = {
+ .exec_op = gen_spi_spinand_exec_op,
+};
+
+static int gen_spi_spinand_probe(struct spi_device *spi)
+{
+ struct spinand_device *spinand;
+ struct gen_spi_spinand_controller *controller;
+ struct spinand_controller *spinand_controller;
+ struct device *dev = &spi->dev;
+ u16 mode = spi->mode;
+ int ret;
+
+ spinand = devm_spinand_alloc(dev);
+ if (IS_ERR(spinand)) {
+ ret = PTR_ERR(spinand);
+ goto out;
+ }
+
+ controller = devm_kzalloc(dev, sizeof(*controller), GFP_KERNEL);
+ if (!controller) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ controller->spi = spi;
+ spinand_controller = &controller->ctrl;
+ spinand_controller->ops = &gen_spi_spinand_ops;
+ spinand_controller->caps = SPINAND_CAP_RD_X1 | SPINAND_CAP_WR_X1;
+
+ if ((mode & SPI_RX_QUAD) && (mode & SPI_TX_QUAD))
+ spinand_controller->caps |= SPINAND_CAP_RD_QUAD;
+
+ if ((mode & SPI_RX_DUAL) && (mode & SPI_TX_DUAL))
+ spinand_controller->caps |= SPINAND_CAP_RD_DUAL;
+
+ if (mode & SPI_RX_QUAD)
+ spinand_controller->caps |= SPINAND_CAP_RD_X4;
+
+ if (mode & SPI_RX_DUAL)
+ spinand_controller->caps |= SPINAND_CAP_RD_X2;
+
+ if (mode & SPI_TX_QUAD)
+ spinand_controller->caps |= SPINAND_CAP_WR_QUAD |
+ SPINAND_CAP_WR_X4;
+
+ if (mode & SPI_TX_DUAL)
+ spinand_controller->caps |= SPINAND_CAP_WR_DUAL |
+ SPINAND_CAP_WR_X2;
+
+ spinand->controller.controller = spinand_controller;
+ spi_set_drvdata(spi, spinand);
+
+ ret = spinand_init(spinand);
+ if (ret)
+ goto out;
+
+ ret = mtd_device_register(spinand_to_mtd(spinand), NULL, 0);
+
+out:
+ return ret;
+}
+
+static int gen_spi_spinand_remove(struct spi_device *spi)
+{
+ struct spinand_device *spinand = spi_get_drvdata(spi);
+ int ret;
+
+ ret = mtd_device_unregister(spinand_to_mtd(spinand));
+ if (ret)
+ return ret;
+
+ spinand_cleanup(spinand);
+
+ return 0;
+}
+
+static struct spi_driver gen_spi_spinand_driver = {
+ .driver = {
+ .name = "generic_spinand",
+ .owner = THIS_MODULE,
+ },
+ .probe = gen_spi_spinand_probe,
+ .remove = gen_spi_spinand_remove,
+};
+module_spi_driver(gen_spi_spinand_driver);
+
+MODULE_DESCRIPTION("Generic SPI controller to support SPI NAND");
+MODULE_AUTHOR("Peter Pan<peterpandong at micron.com>");
+MODULE_LICENSE("GPL v2");
--
1.9.1
More information about the linux-mtd
mailing list