[PATCH 3/4] mtd: mchp23k256: add partitioning support
Boris Brezillon
boris.brezillon at free-electrons.com
Mon May 22 00:38:35 PDT 2017
Hi Chris,
On Mon, 22 May 2017 04:52:34 +0000
Chris Packham <Chris.Packham at alliedtelesis.co.nz> wrote:
> On 18/05/17 03:29, Boris Brezillon wrote:
> > Hi Chris,
> >
> > On Wed, 17 May 2017 17:39:07 +1200
> > Chris Packham <chris.packham at alliedtelesis.co.nz> wrote:
> >
> >> Setting the of_node for the mtd device allows the generic mtd code to
> >> setup the partitions. Additionally we must specify a non-zero erasesize
> >> for the partitions to be writeable.
> >>
> >> Signed-off-by: Chris Packham <chris.packham at alliedtelesis.co.nz>
> >> ---
> >> drivers/mtd/devices/mchp23k256.c | 5 +++++
> >> 1 file changed, 5 insertions(+)
> >>
> >> diff --git a/drivers/mtd/devices/mchp23k256.c b/drivers/mtd/devices/mchp23k256.c
> >> index 2542f5b8b63f..02c6b9dcbd3e 100644
> >> --- a/drivers/mtd/devices/mchp23k256.c
> >> +++ b/drivers/mtd/devices/mchp23k256.c
> >> @@ -143,6 +143,7 @@ static int mchp23k256_probe(struct spi_device *spi)
> >>
> >> data = dev_get_platdata(&spi->dev);
> >>
> >> + mtd_set_of_node(&flash->mtd, spi->dev.of_node);
> >> flash->mtd.dev.parent = &spi->dev;
> >> flash->mtd.type = MTD_RAM;
> >> flash->mtd.flags = MTD_CAP_RAM;
> >> @@ -151,6 +152,10 @@ static int mchp23k256_probe(struct spi_device *spi)
> >> flash->mtd._read = mchp23k256_read;
> >> flash->mtd._write = mchp23k256_write;
> >>
> >> + flash->mtd.erasesize = PAGE_SIZE;
> >> + while (flash->mtd.size & (flash->mtd.erasesize - 1))
> >> + flash->mtd.erasesize >>= 1;
> >> +
> >
> > Can we fix allocate_partition() to properly handle the
> > master->erasesize == 0 case instead of doing that?
> >
>
> Do you mean something like this?
I had something slightly different in mind (see below).
>
> diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
> index ea5e5307f667..0cd20ed6b374 100644
> --- a/drivers/mtd/mtdpart.c
> +++ b/drivers/mtd/mtdpart.c
> @@ -577,6 +577,7 @@ static struct mtd_part *allocate_partition(struct
> mtd_info *master,
> part->name);
> }
> if ((slave->mtd.flags & MTD_WRITEABLE) &&
> + master->erasesize != 0 &&
> mtd_mod_by_eb(slave->mtd.size, &slave->mtd)) {
> slave->mtd.flags &= ~MTD_WRITEABLE;
>
>
> I'm happy to submit this as a formal patch but it could potentially
> affect a number of devices. Whereas the snippet I initially added is
> consistent with drivers/mtd/chips/map_ram.c.
Well, if you're duplicating a workaround that's a good sign this should
actually be handled in the core.
>
> For now I'll leave v2 as-is but I can send a v3 if needed.
>
--->8---
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index ea5e5307f667..378ff4a9174e 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -393,7 +393,9 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
const struct mtd_partition *part, int partno,
uint64_t cur_offset)
{
+ int wr_alignment = master->erasesize ? : master->writesize;
struct mtd_part *slave;
+ u32 remainder;
char *name;
/* allocate the partition structure */
@@ -499,10 +501,12 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
if (slave->offset == MTDPART_OFS_APPEND)
slave->offset = cur_offset;
if (slave->offset == MTDPART_OFS_NXTBLK) {
+ u64 tmp = cur_offset;
+
slave->offset = cur_offset;
- if (mtd_mod_by_eb(cur_offset, master) != 0) {
- /* Round up to next erasesize */
- slave->offset = (mtd_div_by_eb(cur_offset, master) + 1) * master->erasesize;
+ remainder = do_div(tmp, wr_alignment);
+ if (remainder) {
+ slave->offset += wr_alignment - remainder;
printk(KERN_NOTICE "Moving partition %d: "
"0x%012llx -> 0x%012llx\n", partno,
(unsigned long long)cur_offset, (unsigned long long)slave->offset);
@@ -567,19 +571,22 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
slave->mtd.erasesize = master->erasesize;
}
- if ((slave->mtd.flags & MTD_WRITEABLE) &&
- mtd_mod_by_eb(slave->offset, &slave->mtd)) {
+ tmp = slave->offset;
+ remainder = do_div(tmp, wr_alignment);
+ if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
/* Doesn't start on a boundary of major erase size */
/* FIXME: Let it be writable if it is on a boundary of
* _minor_ erase size though */
slave->mtd.flags &= ~MTD_WRITEABLE;
- printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
+ printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase/write block boundary -- force read-only\n",
part->name);
}
- if ((slave->mtd.flags & MTD_WRITEABLE) &&
- mtd_mod_by_eb(slave->mtd.size, &slave->mtd)) {
+
+ tmp = slave->mtd.size;
+ remainder = do_div(tmp, wr_alignment);
+ if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
slave->mtd.flags &= ~MTD_WRITEABLE;
- printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
+ printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase/write block -- force read-only\n",
part->name);
}
More information about the linux-mtd
mailing list