[PATCH 08/31] clk.txt: standardize document format
Mauro Carvalho Chehab
mchehab at s-opensource.com
Thu May 18 18:22:13 PDT 2017
Each text file under Documentation follows a different
format. Some doesn't even have titles!
Change its representation to follow the adopted standard,
using ReST markups for it to be parseable by Sphinx:
- Use section/title markups;
- Use :Author: for authorship;
- Mark literals and literal blocks;
- Mark tables;
- Use ReST notation for footnotes.
Signed-off-by: Mauro Carvalho Chehab <mchehab at s-opensource.com>
---
Documentation/clk.txt | 189 ++++++++++++++++++++++++++++----------------------
1 file changed, 106 insertions(+), 83 deletions(-)
diff --git a/Documentation/clk.txt b/Documentation/clk.txt
index 22f026aa2f34..be909ed45970 100644
--- a/Documentation/clk.txt
+++ b/Documentation/clk.txt
@@ -1,12 +1,16 @@
- The Common Clk Framework
- Mike Turquette <mturquette at ti.com>
+========================
+The Common Clk Framework
+========================
+
+:Author: Mike Turquette <mturquette at ti.com>
This document endeavours to explain the common clk framework details,
and how to port a platform over to this framework. It is not yet a
detailed explanation of the clock api in include/linux/clk.h, but
perhaps someday it will include that information.
- Part 1 - introduction and interface split
+Introduction and interface split
+================================
The common clk framework is an interface to control the clock nodes
available on various devices today. This may come in the form of clock
@@ -35,10 +39,11 @@ is defined in struct clk_foo and pointed to within struct clk_core. This
allows for easy navigation between the two discrete halves of the common
clock interface.
- Part 2 - common data structures and api
+Common data structures and api
+==============================
Below is the common struct clk_core definition from
-drivers/clk/clk.c, modified for brevity:
+drivers/clk/clk.c, modified for brevity::
struct clk_core {
const char *name;
@@ -59,7 +64,7 @@ struct clk. That api is documented in include/linux/clk.h.
Platforms and devices utilizing the common struct clk_core use the struct
clk_ops pointer in struct clk_core to perform the hardware-specific parts of
-the operations defined in clk-provider.h:
+the operations defined in clk-provider.h::
struct clk_ops {
int (*prepare)(struct clk_hw *hw);
@@ -95,19 +100,20 @@ the operations defined in clk-provider.h:
struct dentry *dentry);
};
- Part 3 - hardware clk implementations
+Hardware clk implementations
+============================
The strength of the common struct clk_core comes from its .ops and .hw pointers
which abstract the details of struct clk from the hardware-specific bits, and
vice versa. To illustrate consider the simple gateable clk implementation in
-drivers/clk/clk-gate.c:
+drivers/clk/clk-gate.c::
-struct clk_gate {
- struct clk_hw hw;
- void __iomem *reg;
- u8 bit_idx;
- ...
-};
+ struct clk_gate {
+ struct clk_hw hw;
+ void __iomem *reg;
+ u8 bit_idx;
+ ...
+ };
struct clk_gate contains struct clk_hw hw as well as hardware-specific
knowledge about which register and bit controls this clk's gating.
@@ -115,7 +121,7 @@ Nothing about clock topology or accounting, such as enable_count or
notifier_count, is needed here. That is all handled by the common
framework code and struct clk_core.
-Let's walk through enabling this clk from driver code:
+Let's walk through enabling this clk from driver code::
struct clk *clk;
clk = clk_get(NULL, "my_gateable_clk");
@@ -123,70 +129,71 @@ Let's walk through enabling this clk from driver code:
clk_prepare(clk);
clk_enable(clk);
-The call graph for clk_enable is very simple:
+The call graph for clk_enable is very simple::
-clk_enable(clk);
- clk->ops->enable(clk->hw);
- [resolves to...]
- clk_gate_enable(hw);
- [resolves struct clk gate with to_clk_gate(hw)]
- clk_gate_set_bit(gate);
+ clk_enable(clk);
+ clk->ops->enable(clk->hw);
+ [resolves to...]
+ clk_gate_enable(hw);
+ [resolves struct clk gate with to_clk_gate(hw)]
+ clk_gate_set_bit(gate);
-And the definition of clk_gate_set_bit:
+And the definition of clk_gate_set_bit::
-static void clk_gate_set_bit(struct clk_gate *gate)
-{
- u32 reg;
+ static void clk_gate_set_bit(struct clk_gate *gate)
+ {
+ u32 reg;
- reg = __raw_readl(gate->reg);
- reg |= BIT(gate->bit_idx);
- writel(reg, gate->reg);
-}
+ reg = __raw_readl(gate->reg);
+ reg |= BIT(gate->bit_idx);
+ writel(reg, gate->reg);
+ }
-Note that to_clk_gate is defined as:
+Note that to_clk_gate is defined as::
-#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
+ #define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
This pattern of abstraction is used for every clock hardware
representation.
- Part 4 - supporting your own clk hardware
+Supporting your own clk hardware
+================================
When implementing support for a new type of clock it is only necessary to
-include the following header:
+include the following header::
-#include <linux/clk-provider.h>
+ #include <linux/clk-provider.h>
To construct a clk hardware structure for your platform you must define
-the following:
+the following::
-struct clk_foo {
- struct clk_hw hw;
- ... hardware specific data goes here ...
-};
+ struct clk_foo {
+ struct clk_hw hw;
+ ... hardware specific data goes here ...
+ };
To take advantage of your data you'll need to support valid operations
-for your clk:
+for your clk::
-struct clk_ops clk_foo_ops {
- .enable = &clk_foo_enable;
- .disable = &clk_foo_disable;
-};
+ struct clk_ops clk_foo_ops {
+ .enable = &clk_foo_enable;
+ .disable = &clk_foo_disable;
+ };
-Implement the above functions using container_of:
+Implement the above functions using container_of::
-#define to_clk_foo(_hw) container_of(_hw, struct clk_foo, hw)
+ #define to_clk_foo(_hw) container_of(_hw, struct clk_foo, hw)
-int clk_foo_enable(struct clk_hw *hw)
-{
- struct clk_foo *foo;
+ int clk_foo_enable(struct clk_hw *hw)
+ {
+ struct clk_foo *foo;
- foo = to_clk_foo(hw);
+ foo = to_clk_foo(hw);
- ... perform magic on foo ...
+ ... perform magic on foo ...
- return 0;
-};
+ return 0;
+ };
Below is a matrix detailing which clk_ops are mandatory based upon the
hardware capabilities of that clock. A cell marked as "y" means
@@ -194,41 +201,56 @@ mandatory, a cell marked as "n" implies that either including that
callback is invalid or otherwise unnecessary. Empty cells are either
optional or must be evaluated on a case-by-case basis.
- clock hardware characteristics
- -----------------------------------------------------------
- | gate | change rate | single parent | multiplexer | root |
- |------|-------------|---------------|-------------|------|
-.prepare | | | | | |
-.unprepare | | | | | |
- | | | | | |
-.enable | y | | | | |
-.disable | y | | | | |
-.is_enabled | y | | | | |
- | | | | | |
-.recalc_rate | | y | | | |
-.round_rate | | y [1] | | | |
-.determine_rate | | y [1] | | | |
-.set_rate | | y | | | |
- | | | | | |
-.set_parent | | | n | y | n |
-.get_parent | | | n | y | n |
- | | | | | |
-.recalc_accuracy| | | | | |
- | | | | | |
-.init | | | | | |
- -----------------------------------------------------------
-[1] either one of round_rate or determine_rate is required.
+.. table:: clock hardware characteristics
+
+ +----------------+------+-------------+---------------+-------------+------+
+ | | gate | change rate | single parent | multiplexer | root |
+ +================+======+=============+===============+=============+======+
+ |.prepare | | | | | |
+ +----------------+------+-------------+---------------+-------------+------+
+ |.unprepare | | | | | |
+ +----------------+------+-------------+---------------+-------------+------+
+ +----------------+------+-------------+---------------+-------------+------+
+ |.enable | y | | | | |
+ +----------------+------+-------------+---------------+-------------+------+
+ |.disable | y | | | | |
+ +----------------+------+-------------+---------------+-------------+------+
+ |.is_enabled | y | | | | |
+ +----------------+------+-------------+---------------+-------------+------+
+ +----------------+------+-------------+---------------+-------------+------+
+ |.recalc_rate | | y | | | |
+ +----------------+------+-------------+---------------+-------------+------+
+ |.round_rate | | y [1]_ | | | |
+ +----------------+------+-------------+---------------+-------------+------+
+ |.determine_rate | | y [1]_ | | | |
+ +----------------+------+-------------+---------------+-------------+------+
+ |.set_rate | | y | | | |
+ +----------------+------+-------------+---------------+-------------+------+
+ +----------------+------+-------------+---------------+-------------+------+
+ |.set_parent | | | n | y | n |
+ +----------------+------+-------------+---------------+-------------+------+
+ |.get_parent | | | n | y | n |
+ +----------------+------+-------------+---------------+-------------+------+
+ +----------------+------+-------------+---------------+-------------+------+
+ |.recalc_accuracy| | | | | |
+ +----------------+------+-------------+---------------+-------------+------+
+ +----------------+------+-------------+---------------+-------------+------+
+ |.init | | | | | |
+ +----------------+------+-------------+---------------+-------------+------+
+
+.. [1] either one of round_rate or determine_rate is required.
Finally, register your clock at run-time with a hardware-specific
registration function. This function simply populates struct clk_foo's
data and then passes the common struct clk parameters to the framework
-with a call to:
+with a call to::
-clk_register(...)
+ clk_register(...)
-See the basic clock types in drivers/clk/clk-*.c for examples.
+See the basic clock types in ``drivers/clk/clk-*.c`` for examples.
- Part 5 - Disabling clock gating of unused clocks
+Disabling clock gating of unused clocks
+=======================================
Sometimes during development it can be useful to be able to bypass the
default disabling of unused clocks. For example, if drivers aren't enabling
@@ -239,7 +261,8 @@ are sorted out.
To bypass this disabling, include "clk_ignore_unused" in the bootargs to the
kernel.
- Part 6 - Locking
+Locking
+=======
The common clock framework uses two global locks, the prepare lock and the
enable lock.
--
2.9.4
More information about the linux-mtd
mailing list