[PATCH 0/3] Altera Quadspi Controller Version 2

[matthew.gerlach at linux.intel.com]

From: Matthew Gerlach <matthew.gerlach at linux.intel.com>

Hi Everyone,

This patch set adds support for Version 2 of the Altera
Quadspi Controller.  Version 1 of the Altera Quadspi
Controller only supported 1 byte of flash id instead of
the 3 bytes required for a JEDEC ID.  As such the driver
for Version 1 was rejected.  Please see 
https://patchwork.kernel.org/patch/7025681

Patch 1: add device tree bindings document for platform driver

Patch 2: add core code for driver

Patch 3: add platform driver

Matthew Gerlach (3):
  ARM: dts: Bindings for Altera Quadspi Controller Version 2
  mtd: spi-nor: core code for the Altera Quadspi Flash Controller v2
  mtd: spi-nor: Altera Quadspi Flash Controller v2 Platform driver

 .../devicetree/bindings/mtd/altera-quadspi-v2.txt  |  37 ++
 MAINTAINERS                                        |   8 +
 drivers/mtd/spi-nor/Kconfig                        |  10 +
 drivers/mtd/spi-nor/Makefile                       |   5 +-
 drivers/mtd/spi-nor/altera-quadspi-platform.c      | 137 +++++
 drivers/mtd/spi-nor/altera-quadspi.c               | 676 +++++++++++++++++++++
 include/linux/mtd/altera-quadspi.h                 |  28 +
 7 files changed, 900 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/altera-quadspi-v2.txt
 create mode 100644 drivers/mtd/spi-nor/altera-quadspi-platform.c
 create mode 100644 drivers/mtd/spi-nor/altera-quadspi.c
 create mode 100644 include/linux/mtd/altera-quadspi.h

-- 
2.7.4