[PATCH 1/2] mtd: spi-nor: Add support for Macronix mx66l1g45g spi flash

[Cyrille Pitchen]

Le 19/04/2017 à 16:04, Marek Vasut a écrit :
> On 04/19/2017 04:00 PM, Cédric Le Goater wrote:
>> These modules are used on the OpenPOWER Witherspoon systems to hold
>> the POWER9 host firmware image. The SPI_NOR_DUAL_READ flags is added
>> for the Aspeed SoCs which do not support QUAD reads.
>>
>> Signed-off-by: Cédric Le Goater <clg at kaod.org>
> 
> Reviewed-by: Marek Vasut <marek.vasut at gmail.com>
>

Applied to the spi-nor/next branch of l2-mtd

Thanks!

>> ---
>>
>>  The line is over 80 characters but it looks better.
>>
>>  drivers/mtd/spi-nor/spi-nor.c | 1 +
>>  1 file changed, 1 insertion(+)
>>
>> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
>> index 747645c74134..ee777df4466c 100644
>> --- a/drivers/mtd/spi-nor/spi-nor.c
>> +++ b/drivers/mtd/spi-nor/spi-nor.c
>> @@ -1020,6 +1020,7 @@ static const struct flash_info spi_nor_ids[] = {
>>  	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K) },
>>  	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
>>  	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_QUAD_READ) },
>> +	{ "mx66l1g45g",  INFO(0xc2201b, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
>>  	{ "mx66l1g55g",  INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
>>  
>>  	/* Micron */
>>
> 
>