[PATCH v7 05/16] watchdog: lantiq: add device tree binding documentation

[Rob Herring]

On Mon, Jul 03, 2017 at 12:40:40AM +0200, Hauke Mehrtens wrote:
> The binding was not documented before, add the documentation now.
> 
> Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
> ---
>  .../devicetree/bindings/watchdog/lantiq-wdt.txt    | 24 ++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/watchdog/lantiq-wdt.txt
> 
> diff --git a/Documentation/devicetree/bindings/watchdog/lantiq-wdt.txt b/Documentation/devicetree/bindings/watchdog/lantiq-wdt.txt
> new file mode 100644
> index 000000000000..c3967feebb6c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/lantiq-wdt.txt
> @@ -0,0 +1,24 @@
> +Lantiq WTD watchdog binding
> +============================
> +
> +This describes the binding of the Lantiq watchdog driver.
> +
> +-------------------------------------------------------------------------------
> +Required properties:
> +- compatible		: Should be one of
> +				"lantiq,wdt"
> +				"lantiq,xrx100-wdt"
> +				"lantiq,xrx200-wdt"
> +				"lantiq,falcon-wdt"
> +- lantiq,rcu		: A phandle to the RCU syscon (required for
> +			  "lantiq,falcon-wdt", "lantiq,xrx200-wdt" and
> +			  "lantiq,xrx100-wdt")
> +
> +-------------------------------------------------------------------------------
> +Example for the watchdog on the xRX200 SoCs:
> +		watchdog at 803f0 {
> +			compatible = "lantiq,xrx200-wdt", "lantiq,xrx100-wdt";

This is still mismatched. If the example is correct, then the compatible 
list should be:

"lantiq,wdt"
"lantiq,xrx100-wdt"
"lantiq,xrx200-wdt", "lantiq,xrx100-wdt"
"lantiq,falcon-wdt"

You can also remove "lantiq,xrx200-wdt" from the driver if you want as 
"lantiq,xrx100-wdt" is good enough to match on.

Rob