[PATCH 10/13] mtd: nand: jz4740: Let the pinctrl driver configure the pins
Boris Brezillon
boris.brezillon at free-electrons.com
Fri Jan 27 09:33:11 PST 2017
On Wed, 18 Jan 2017 00:14:18 +0100
Paul Cercueil <paul at crapouillou.net> wrote:
> Before, this NAND driver would set itself the configuration of the
> chip-select pins for the various NAND banks.
>
> Now that the JZ4740 and similar SoCs have a pinctrl driver, we rely on
> the pins being properly configured before the driver probes.
>
> Signed-off-by: Paul Cercueil <paul at crapouillou.net>
Acked-by: Boris Brezillon <boris.brezillon at free-electrons.com>
> ---
> drivers/mtd/nand/jz4740_nand.c | 23 +----------------------
> 1 file changed, 1 insertion(+), 22 deletions(-)
>
> diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c
> index 5551c36adbdf..0d06a1f07d82 100644
> --- a/drivers/mtd/nand/jz4740_nand.c
> +++ b/drivers/mtd/nand/jz4740_nand.c
> @@ -25,7 +25,6 @@
>
> #include <linux/gpio.h>
>
> -#include <asm/mach-jz4740/gpio.h>
> #include <asm/mach-jz4740/jz4740_nand.h>
>
> #define JZ_REG_NAND_CTRL 0x50
> @@ -310,34 +309,20 @@ static int jz_nand_detect_bank(struct platform_device *pdev,
> uint8_t *nand_dev_id)
> {
> int ret;
> - int gpio;
> - char gpio_name[9];
> char res_name[6];
> uint32_t ctrl;
> struct nand_chip *chip = &nand->chip;
> struct mtd_info *mtd = nand_to_mtd(chip);
>
> - /* Request GPIO port. */
> - gpio = JZ_GPIO_MEM_CS0 + bank - 1;
> - sprintf(gpio_name, "NAND CS%d", bank);
> - ret = gpio_request(gpio, gpio_name);
> - if (ret) {
> - dev_warn(&pdev->dev,
> - "Failed to request %s gpio %d: %d\n",
> - gpio_name, gpio, ret);
> - goto notfound_gpio;
> - }
> -
> /* Request I/O resource. */
> sprintf(res_name, "bank%d", bank);
> ret = jz_nand_ioremap_resource(pdev, res_name,
> &nand->bank_mem[bank - 1],
> &nand->bank_base[bank - 1]);
> if (ret)
> - goto notfound_resource;
> + return ret;
>
> /* Enable chip in bank. */
> - jz_gpio_set_function(gpio, JZ_GPIO_FUNC_MEM_CS0);
> ctrl = readl(nand->base + JZ_REG_NAND_CTRL);
> ctrl |= JZ_NAND_CTRL_ENABLE_CHIP(bank - 1);
> writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
> @@ -377,12 +362,8 @@ static int jz_nand_detect_bank(struct platform_device *pdev,
> dev_info(&pdev->dev, "No chip found on bank %i\n", bank);
> ctrl &= ~(JZ_NAND_CTRL_ENABLE_CHIP(bank - 1));
> writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
> - jz_gpio_set_function(gpio, JZ_GPIO_FUNC_NONE);
> jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
> nand->bank_base[bank - 1]);
> -notfound_resource:
> - gpio_free(gpio);
> -notfound_gpio:
> return ret;
> }
>
> @@ -503,7 +484,6 @@ static int jz_nand_probe(struct platform_device *pdev)
> err_unclaim_banks:
> while (chipnr--) {
> unsigned char bank = nand->banks[chipnr];
> - gpio_free(JZ_GPIO_MEM_CS0 + bank - 1);
> jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
> nand->bank_base[bank - 1]);
> }
> @@ -530,7 +510,6 @@ static int jz_nand_remove(struct platform_device *pdev)
> if (bank != 0) {
> jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
> nand->bank_base[bank - 1]);
> - gpio_free(JZ_GPIO_MEM_CS0 + bank - 1);
> }
> }
>
More information about the linux-mtd
mailing list