[PATCH] mtd: maps: lantiq-flash: Check if the EBU endianness swap is enabled
Sebastien Decourriere
sebtx452 at gmail.com
Thu Jan 19 02:06:55 PST 2017
The purpose of this patch is to enable the software address endianness
swapping only when the in SoC EBU endianness swapping is disabled.
To perform this check, I look at Bit 30 of the EBU_CON_0 register.
Actually, the driver expects that the in SoC swapping is disabled.
This is the case with current bootloaders shuch as U-boot.
This applies only to vr9 (xrx200) rev 1.2 and ar10 (xrx300).
I have a router which uses a proprietary bootloader which keeps
the in SoC swapping enabled. The SoC in this router is a vrx200 v1.2.
In this SoC version, I can keep the in SoC swapping without any problem.
This patch replaces my previous broken patch.
Signed-off-by: Sebastien Decourriere <sebtx452 at gmail.com>
---
drivers/mtd/maps/lantiq-flash.c | 27 ++++++++++++++++++++++++---
1 file changed, 24 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c
index c8febb3..1cbbdcb 100644
--- a/drivers/mtd/maps/lantiq-flash.c
+++ b/drivers/mtd/maps/lantiq-flash.c
@@ -38,6 +38,8 @@ enum {
LTQ_NOR_NORMAL
};
+#define EBU_ENDIAN_SWAP BIT(30)
+
struct ltq_mtd {
struct resource *res;
struct mtd_info *mtd;
@@ -113,6 +115,20 @@ ltq_mtd_probe(struct platform_device *pdev)
struct ltq_mtd *ltq_mtd;
struct cfi_private *cfi;
int err;
+ bool mtd_addr_swap;
+
+ /* If SoC is vr9 >= 1.2 or ar10 and EBU endian swap
+ is enabled, we don't need to do software address swap */
+ if ( ltq_ebu_r32(LTQ_EBU_BUSCON0) & EBU_ENDIAN_SWAP ) {
+ switch (ltq_soc_type()) {
+ case SOC_TYPE_VR9_2 :
+ case SOC_TYPE_AR10 :
+ mtd_addr_swap = false;
+ break;
+ default :
+ mtd_addr_swap = true;
+ }
+ } else mtd_addr_swap = true;
if (of_machine_is_compatible("lantiq,falcon") &&
(ltq_boot_select() != BS_FLASH)) {
@@ -150,7 +166,10 @@ ltq_mtd_probe(struct platform_device *pdev)
ltq_mtd->map->copy_from = ltq_copy_from;
ltq_mtd->map->copy_to = ltq_copy_to;
- ltq_mtd->map->map_priv_1 = LTQ_NOR_PROBING;
+ if (mtd_addr_swap)
+ ltq_mtd->map->map_priv_1 = LTQ_NOR_PROBING;
+ else
+ ltq_mtd->map->map_priv_1 = LTQ_NOR_NORMAL;
ltq_mtd->mtd = do_map_probe("cfi_probe", ltq_mtd->map);
ltq_mtd->map->map_priv_1 = LTQ_NOR_NORMAL;
@@ -163,8 +182,10 @@ ltq_mtd_probe(struct platform_device *pdev)
mtd_set_of_node(ltq_mtd->mtd, pdev->dev.of_node);
cfi = ltq_mtd->map->fldrv_priv;
- cfi->addr_unlock1 ^= 1;
- cfi->addr_unlock2 ^= 1;
+ if (mtd_addr_swap) {
+ cfi->addr_unlock1 ^= 1;
+ cfi->addr_unlock2 ^= 1;
+ }
err = mtd_device_register(ltq_mtd->mtd, NULL, 0);
if (err) {
--
2.1.4
More information about the linux-mtd
mailing list