[PATCH v2] mtd: spi-nor: add dt support for Everspin MRAMs

[Cyrille Pitchen]

Hi,

Le 16/01/2017 à 22:00, Uwe Kleine-König a écrit :
> The MR25 family doesn't support JEDEC, so they need explicit mentioning
> in the list of supported spi IDs. This makes it possible to add these
> using for example:
> 
> 	compatible = "everspin,mr25h40";
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
> ---
> Changes since (implicit) v1:
>  - use Kib instead of kib
> 
>  drivers/mtd/devices/m25p80.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
> index 9cf7fcd28034..aa50bd96de3a 100644
> --- a/drivers/mtd/devices/m25p80.c
> +++ b/drivers/mtd/devices/m25p80.c
> @@ -305,6 +305,11 @@ static const struct spi_device_id m25p_ids[] = {
>  	{"m25p40-nonjedec"},	{"m25p80-nonjedec"},	{"m25p16-nonjedec"},
>  	{"m25p32-nonjedec"},	{"m25p64-nonjedec"},	{"m25p128-nonjedec"},
>  
> +	/* Everspin MRAMs */
> +	{ "mr25h256" }, /* 256 Kib, 40 MHz */

There is already a "mr25h256" entry in the m25p_ids[] array.
It's a good idea to regroup everspin memories but it might be better to
reuse the existing entry.

The previous entry is between "at25df321a", ... and "mx25l4005a" so it
doesn't appear in your patch.

> +	{ "mr25h10" },  /*   1 Mib, 40 MHz */
> +	{ "mr25h40" },  /*   4 Mib, 40 MHz */
> +
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(spi, m25p_ids);
>