[PATCH] mtd: spi-nor: add dt support for Everspin MRAMs

[Marek Vasut]

On 01/16/2017 02:55 PM, Rafał Miłecki wrote:
> On 16 January 2017 at 14:35, Uwe Kleine-König
> <u.kleine-koenig at pengutronix.de> wrote:
>> The MR25 family doesn't support JEDEC, so they need explicit mentioning
>> in the list of supported spi IDs. This makes it possible to add these
>> using for example:
>>
>>         compatible = "everspin,mr25h40";
>>
>> Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
>> ---
>> Hello,
>>
>> independent of the decision if -nonjedec is ok for m25p, this is needed
>> to make Everspin's MRAMs work.
>>
>> Best regards
>> Uwe
>>
>>  drivers/mtd/devices/m25p80.c | 5 +++++
>>  1 file changed, 5 insertions(+)
>>
>> diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
>> --- a/drivers/mtd/devices/m25p80.c
>> +++ b/drivers/mtd/devices/m25p80.c
>> @@ -305,6 +305,11 @@ static const struct spi_device_id m25p_ids[] = {
>>         {"m25p40-nonjedec"},    {"m25p80-nonjedec"},    {"m25p16-nonjedec"},
>>         {"m25p32-nonjedec"},    {"m25p64-nonjedec"},    {"m25p128-nonjedec"},
>>
>> +       /* Everspin MRAMs without JEDEC support */
>> +       { "mr25h256" }, /* 256 kib, 40 MHz */
> 
> A trivial thing: I think it should be Kib
> https://en.wikipedia.org/wiki/Binary_prefix
> 
Except for that, it looks good IMO.

-- 
Best regards,
Marek Vasut