[PATCH v4 10/15] mtd: nand: move Micron specific init logic in nand_micron.c

[Marek Vasut]

On 01/03/2017 02:01 PM, Boris Brezillon wrote:
> Move Micron specific initialization logic into nand_micron.c. This is
> part of the "separate vendor specific code from core" cleanup process.
> 
> Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>

[...]

> diff --git a/drivers/mtd/nand/nand_micron.c b/drivers/mtd/nand/nand_micron.c
> new file mode 100644
> index 000000000000..ddb9adf12c21
> --- /dev/null
> +++ b/drivers/mtd/nand/nand_micron.c
> @@ -0,0 +1,83 @@
> +/*
> + * Copyright (C) 2013 Boris Brezillon <boris.brezillon at free-electrons.com>

2013-2017 ?

> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/mtd/nand.h>
> +
> +struct nand_onfi_vendor_micron {
> +	u8 two_plane_read;
> +	u8 read_cache;
> +	u8 read_unique_id;
> +	u8 dq_imped;
> +	u8 dq_imped_num_settings;
> +	u8 dq_imped_feat_addr;
> +	u8 rb_pulldown_strength;
> +	u8 rb_pulldown_strength_feat_addr;
> +	u8 rb_pulldown_strength_num_settings;
> +	u8 otp_mode;
> +	u8 otp_page_start;
> +	u8 otp_data_prot_addr;
> +	u8 otp_num_pages;
> +	u8 otp_feat_addr;
> +	u8 read_retry_options;
> +	u8 reserved[72];
> +	u8 param_revision;
> +} __packed;

Is this __packed really needed?

-- 
Best regards,
Marek Vasut