[PATCH 10/11] nand: spi: Add generic SPI controller support
Peter Pan
peterpandong at micron.com
Tue Feb 21 00:00:09 PST 2017
This commit supports to use generic spi controller
as SPI NAND controller.
Signed-off-by: Peter Pan <peterpandong at micron.com>
---
drivers/mtd/nand/spi/Kconfig | 2 +
drivers/mtd/nand/spi/Makefile | 1 +
drivers/mtd/nand/spi/chips/Kconfig | 5 +
drivers/mtd/nand/spi/chips/Makefile | 1 +
drivers/mtd/nand/spi/chips/generic_spi.c | 269 +++++++++++++++++++++++++++++++
5 files changed, 278 insertions(+)
create mode 100644 drivers/mtd/nand/spi/chips/Kconfig
create mode 100644 drivers/mtd/nand/spi/chips/Makefile
create mode 100644 drivers/mtd/nand/spi/chips/generic_spi.c
diff --git a/drivers/mtd/nand/spi/Kconfig b/drivers/mtd/nand/spi/Kconfig
index 04a7b71..07ebbb0 100644
--- a/drivers/mtd/nand/spi/Kconfig
+++ b/drivers/mtd/nand/spi/Kconfig
@@ -3,3 +3,5 @@ menuconfig MTD_SPI_NAND
depends on MTD_NAND
help
This is the framework for the SPI NAND device drivers.
+
+source "drivers/mtd/nand/spi/chips/Kconfig"
diff --git a/drivers/mtd/nand/spi/Makefile b/drivers/mtd/nand/spi/Makefile
index 3c617d6..f0775d2 100644
--- a/drivers/mtd/nand/spi/Makefile
+++ b/drivers/mtd/nand/spi/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_MTD_SPI_NAND) += spi-nand-base.o
obj-$(CONFIG_MTD_SPI_NAND) += spi-nand-cmd.o
+obj-$(CONFIG_MTD_SPI_NAND) += chips/
diff --git a/drivers/mtd/nand/spi/chips/Kconfig b/drivers/mtd/nand/spi/chips/Kconfig
new file mode 100644
index 0000000..337a94f
--- /dev/null
+++ b/drivers/mtd/nand/spi/chips/Kconfig
@@ -0,0 +1,5 @@
+config GENERIC_SPI_NAND
+ tristate "SPI-NAND with generic SPI bus Support"
+ depends on MTD_SPI_NAND && SPI
+ help
+ This is to support SPI NAND device with generic SPI bus.
diff --git a/drivers/mtd/nand/spi/chips/Makefile b/drivers/mtd/nand/spi/chips/Makefile
new file mode 100644
index 0000000..2cb7763
--- /dev/null
+++ b/drivers/mtd/nand/spi/chips/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_GENERIC_SPI_NAND) += generic_spi.o
diff --git a/drivers/mtd/nand/spi/chips/generic_spi.c b/drivers/mtd/nand/spi/chips/generic_spi.c
new file mode 100644
index 0000000..38d8613
--- /dev/null
+++ b/drivers/mtd/nand/spi/chips/generic_spi.c
@@ -0,0 +1,269 @@
+/*
+ * Copyright (c) 2009-2017 Micron Technology, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/mtd/spi-nand.h>
+
+static int micron_ooblayout_ecc_64(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 3)
+ return -ERANGE;
+
+ oobregion->length = 8;
+ oobregion->offset = (section * 2 + 1) * 8;
+
+ return 0;
+}
+
+static int micron_ooblayout_free_64(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 3)
+ return -ERANGE;
+
+ oobregion->length = section ? 8 : 6;
+ oobregion->offset = section ? section * 16 : 2;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops micron_ooblayout_64_ops = {
+ .ecc = micron_ooblayout_ecc_64,
+ .free = micron_ooblayout_free_64,
+};
+
+static int micron_ooblayout_ecc_128(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section)
+ return -ERANGE;
+
+ oobregion->length = 64;
+ oobregion->offset = 64;
+
+ return 0;
+}
+
+static int micron_ooblayout_free_128(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section)
+ return -ERANGE;
+
+ oobregion->length = 62;
+ oobregion->offset = 2;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops micron_ooblayout_128_ops = {
+ .ecc = micron_ooblayout_ecc_128,
+ .free = micron_ooblayout_free_128,
+};
+
+static void spi_nand_mt29f_ecc_status(struct spi_nand_chip *chip,
+ unsigned int status,
+ unsigned int *corrected,
+ unsigned int *ecc_error)
+{
+ unsigned int ecc_status = status & SPI_NAND_MT29F_ECC_MASK;
+
+ *ecc_error = (ecc_status == SPI_NAND_MT29F_ECC_UNCORR);
+ switch (ecc_status) {
+ case SPI_NAND_MT29F_ECC_0_BIT:
+ *corrected = 0;
+ break;
+ case SPI_NAND_MT29F_ECC_1_3_BIT:
+ *corrected = 3;
+ break;
+ case SPI_NAND_MT29F_ECC_4_6_BIT:
+ *corrected = 6;
+ break;
+ case SPI_NAND_MT29F_ECC_7_8_BIT:
+ *corrected = 8;
+ break;
+ }
+}
+
+static int spi_nand_manufacture_init(struct spi_nand_chip *chip)
+{
+ struct mtd_info *mtd = spi_nand_to_mtd(chip);
+ struct nand_device *nand = mtd_to_nand(mtd);
+
+ switch (chip->mfr_id) {
+ case SPINAND_MFR_MICRON:
+ chip->get_ecc_status = spi_nand_mt29f_ecc_status;
+ if (nand_per_page_oobsize(nand) == 64)
+ mtd_set_ooblayout(mtd, µn_ooblayout_64_ops);
+ else if (nand_per_page_oobsize(nand) == 128)
+ mtd_set_ooblayout(mtd, µn_ooblayout_128_ops);
+
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * generic_spi_nand_cmd_fn - to process a command to send to the SPI-NAND
+ * by generic SPI bus
+ * @chip: SPI-NAND device structure
+ * @cmd: command structure
+ * Description:
+ * Set up the command buffer to send to the SPI controller.
+ * The command buffer has to initialized to 0.
+ */
+static int generic_spi_nand_cmd_fn(struct spi_nand_chip *chip,
+ struct spi_nand_cmd *cmd)
+{
+ struct spi_nand_cmd_cfg *cmd_cfg = spi_nand_get_cmd_cfg(cmd->cmd);
+ struct spi_message message;
+ struct spi_transfer x[3];
+ struct spi_device *spi = chip->priv;
+ u8 buf[SPINAND_MAX_ADDR_LEN];
+
+ spi_message_init(&message);
+ memset(x, 0, sizeof(x));
+ x[0].len = 1;
+ x[0].tx_nbits = 1;
+ x[0].tx_buf = &cmd->cmd;
+ spi_message_add_tail(&x[0], &message);
+
+ if (cmd_cfg->addr_bytes || cmd_cfg->dummy_bytes) {
+ if (cmd_cfg->addr_bytes > cmd->n_addr) {
+ memcpy(buf, cmd->addr, cmd->n_addr);
+ memset(cmd->addr, 0, cmd->n_addr);
+ memcpy(cmd->addr + cmd_cfg->addr_bytes - cmd->n_addr,
+ buf, cmd->n_addr);
+ }
+ x[1].len = cmd_cfg->addr_bytes + cmd_cfg->dummy_bytes;
+ x[1].tx_nbits = cmd_cfg->addr_bits;
+ x[1].tx_buf = cmd->addr;
+ spi_message_add_tail(&x[1], &message);
+ }
+ if (cmd->n_tx) {
+ x[2].len = cmd->n_tx;
+ x[2].tx_nbits = cmd_cfg->data_bits;
+ x[2].tx_buf = cmd->tx_buf;
+ spi_message_add_tail(&x[2], &message);
+ } else if (cmd->n_rx) {
+ x[2].len = cmd->n_rx;
+ x[2].rx_nbits = cmd_cfg->data_bits;
+ x[2].rx_buf = cmd->rx_buf;
+ spi_message_add_tail(&x[2], &message);
+ }
+ return spi_sync(spi, &message);
+}
+
+static int generic_spi_nand_probe(struct spi_device *spi)
+{
+ struct spi_nand_chip *chip;
+ int mfr;
+ struct mtd_info *mtd;
+ int ret;
+ u32 max_speed_hz = spi->max_speed_hz;
+
+ chip = kzalloc(sizeof(struct spi_nand_chip), GFP_KERNEL);
+ if (!chip) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+ mtd = spi_nand_to_mtd(chip);
+ chip->command_fn = generic_spi_nand_cmd_fn;
+ if (spi->mode & SPI_RX_QUAD)
+ chip->controller_caps |= SPINAND_RD_QUAD | SPINAND_RD_X4;
+ if (spi->mode & SPI_RX_DUAL)
+ chip->controller_caps |= SPINAND_RD_DUAL | SPINAND_RD_X2;
+ if (spi->mode & SPI_TX_QUAD)
+ chip->controller_caps |= SPINAND_WR_QUAD | SPINAND_WR_X4;
+ if (spi->mode & SPI_TX_DUAL)
+ chip->controller_caps |= SPINAND_WR_DUAL | SPINAND_WR_X2;
+ chip->priv = spi;
+ spi_set_drvdata(spi, chip);
+ /*
+ * read ID command format might be different for different manufactory
+ * such as, Micron SPI NAND need extra one dummy byte after perform
+ * read ID command but Giga device don't need.
+ *
+ * So, specify manufactory of device in device tree is obligatory
+ */
+ mfr = spi_get_device_id(spi)->driver_data;
+ ret = spi_nand_set_cmd_cfg_table(mfr);
+ if (ret)
+ goto err2;
+
+ spi->max_speed_hz = min_t(int, 25000000, max_speed_hz);
+ ret = spi_nand_scan_ident(chip);
+ if (ret)
+ goto err2;
+
+ spi_nand_manufacture_init(chip);
+
+ spi->max_speed_hz = max_speed_hz;
+ ret = spi_nand_scan_tail(chip);
+ if (ret)
+ goto err3;
+
+ mtd_set_of_node(mtd, spi->dev.of_node);
+
+ ret = mtd_device_parse_register(mtd, NULL, NULL, NULL, 0);
+ if (!ret)
+ return 0;
+
+ spi_nand_scan_tail_release(chip);
+err3:
+ spi_nand_scan_ident_release(chip);
+err2:
+ kfree(chip);
+err1:
+ return ret;
+}
+
+static int generic_spi_nand_remove(struct spi_device *spi)
+{
+ struct spi_nand_chip *chip = spi_get_drvdata(spi);
+
+ spi_nand_release(chip);
+ kfree(chip);
+
+ return 0;
+}
+
+
+static const struct spi_device_id spi_nand_id_table[] = {
+ { "mt29f", SPINAND_MFR_MICRON },
+ { },
+};
+MODULE_DEVICE_TABLE(spi, spi_nand_id_table);
+
+static struct spi_driver generic_spi_nand_driver = {
+ .driver = {
+ .name = "generic_spi_nand",
+ .owner = THIS_MODULE,
+ },
+ .id_table = spi_nand_id_table,
+ .probe = generic_spi_nand_probe,
+ .remove = generic_spi_nand_remove,
+};
+module_spi_driver(generic_spi_nand_driver);
+
+
+MODULE_DESCRIPTION("Generic SPI controller to support SPI NAND");
+MODULE_AUTHOR("Peter Pan<peterpandong at micron.com>");
+MODULE_LICENSE("GPL v2");
--
1.9.1
More information about the linux-mtd
mailing list