[PATCH V2, 2/2] mtd: nand: brcmnand: Check flash #WP pin status before nand erase/program
Kamal Dasu
kdasu.kdev at gmail.com
Thu Feb 16 10:46:52 PST 2017
brcmnand controller v6.x and v7.x lets driver to enable disable #WP pin
via NAND_WP bit in CS_SELECT register. Driver implementation assumes that
setting/resetting the bit would assert/de-assert #WP pin instantaneously
from the flash part's perspective, and was proceeding to erase/program
without verifying flash status byte for protection bit. In rigorous
testing this was causing rare data corruptions with erase and/or
subsequent programming. To fix this added verification logic to
brcmandn_wp_set() by reading flash status and verifying protection bit
indicating #WP pin status. The new logic makes sure controller as well
as the flash is ready to accept commands.
Signed-off-by: Kamal Dasu <kdasu.kdev at gmail.com>
---
drivers/mtd/nand/brcmnand/brcmnand.c | 53 ++++++++++++++++++++++++++++++++++--
1 file changed, 51 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/brcmnand/brcmnand.c b/drivers/mtd/nand/brcmnand/brcmnand.c
index c7c4efe..2f082a3 100644
--- a/drivers/mtd/nand/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/brcmnand/brcmnand.c
@@ -101,6 +101,9 @@ struct brcm_nand_dma_desc {
#define BRCMNAND_MIN_BLOCKSIZE (8 * 1024)
#define BRCMNAND_MIN_DEVSIZE (4ULL * 1024 * 1024)
+#define FLASH_RDY (NAND_STATUS_READY)
+#define NAND_CTRL_RDY (INTFC_CTLR_READY | INTFC_FLASH_READY)
+
/* Controller feature flags */
enum {
BRCMNAND_HAS_1K_SECTORS = BIT(0),
@@ -765,12 +768,57 @@ enum {
CS_SELECT_AUTO_DEVICE_ID_CFG = BIT(30),
};
-static int brcmnand_set_wp(struct brcmnand_host *host, int en)
+static void bcmnand_ctrl_busy_poll(struct brcmnand_controller *ctrl, u32 mask)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(200);
+
+ while ((brcmnand_read_reg(ctrl, BRCMNAND_INTFC_STATUS) & mask) !=
+ mask) {
+ if (time_after(jiffies, timeout)) {
+ dev_warn(ctrl->dev, "timeout on ctrl_ready\n");
+ break;
+ }
+ cpu_relax();
+ }
+}
+
+static inline void brcmnand_set_wp_reg(struct brcmnand_controller *ctrl, int en)
{
- struct brcmnand_controller *ctrl = host->ctrl;
u32 val = en ? CS_SELECT_NAND_WP : 0;
brcmnand_rmw_reg(ctrl, BRCMNAND_CS_SELECT, CS_SELECT_NAND_WP, 0, val);
+}
+
+static int brcmnand_set_wp(struct brcmnand_host *host, int en)
+{
+ struct brcmnand_controller *ctrl = host->ctrl;
+ struct mtd_info *mtd = nand_to_mtd(&host->chip);
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ u32 sts_reg;
+ bool is_wp;
+
+ /*
+ * make sure ctrl/flash ready before and after
+ * changing state of WP PIN
+ */
+ bcmnand_ctrl_busy_poll(ctrl, NAND_CTRL_RDY | FLASH_RDY);
+ brcmnand_set_wp_reg(ctrl, en);
+ chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
+ bcmnand_ctrl_busy_poll(ctrl, NAND_CTRL_RDY | FLASH_RDY);
+ sts_reg = brcmnand_read_reg(ctrl, BRCMNAND_INTFC_STATUS);
+ /* NAND_STATUS_WP 0x80 = not protected, 0x00 = protected */
+ is_wp = (sts_reg & NAND_STATUS_WP) ? false : true;
+
+ if (is_wp != en) {
+ u32 nand_wp = brcmnand_read_reg(ctrl, BRCMNAND_CS_SELECT);
+
+ nand_wp &= CS_SELECT_NAND_WP;
+ dev_err_ratelimited(&host->pdev->dev,
+ "#WP %s sts:0x%x expected %s NAND_WP 0x%x\n",
+ is_wp ? "On" : "Off", sts_reg & 0xff,
+ en ? "On" : "Off", nand_wp ? 1 : 0);
+ return -EINVAL;
+ }
return 0;
}
@@ -1167,6 +1215,7 @@ static void brcmnand_send_cmd(struct brcmnand_host *host, int cmd)
BUG_ON(ctrl->cmd_pending != 0);
ctrl->cmd_pending = cmd;
+ bcmnand_ctrl_busy_poll(ctrl, NAND_CTRL_RDY);
intfc = brcmnand_read_reg(ctrl, BRCMNAND_INTFC_STATUS);
WARN_ON(!(intfc & INTFC_CTLR_READY));
--
1.9.1
More information about the linux-mtd
mailing list