[PATCH v3 2/2] mtd: m25p80: Added pm ops support

[Marek Vasut]

On 02/10/2017 10:49 PM, Kamal Dasu wrote:
> Added power management ops for resume to be able to resan spi-nor
> device and set it to right transfer modes in its probed state after
> poweron. Some SoC implementations might  power down the spi-nor flash
> and loose its initial settings on suspend. A resume should retore the
> part to its probed state.
> 
> Signed-off-by: Kamal Dasu <kdasu.kdev at gmail.com>
> ---
>  drivers/mtd/devices/m25p80.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
> index c4df3b1..be94fba 100644
> --- a/drivers/mtd/devices/m25p80.c
> +++ b/drivers/mtd/devices/m25p80.c
> @@ -324,10 +324,26 @@ static int m25p_remove(struct spi_device *spi)
>  };
>  MODULE_DEVICE_TABLE(of, m25p_of_table);
>  
> +#ifdef CONFIG_PM_SLEEP
> +static int m25p_suspend(struct device *dev)
> +{
> +	return 0;

Can't you omit this function ?

> +}
> +
> +static int m25p_resume(struct device *dev)
> +{
> +	struct m25p *flash = dev_get_drvdata(dev);
> +
> +	return spi_nor_init(&flash->spi_nor);
> +}
> +#endif
> +static SIMPLE_DEV_PM_OPS(m25p_pm_ops, m25p_suspend, m25p_resume);
> +
>  static struct spi_driver m25p80_driver = {
>  	.driver = {
>  		.name	= "m25p80",
>  		.of_match_table = m25p_of_table,
> +		.pm     = &m25p_pm_ops,
>  	},
>  	.id_table	= m25p_ids,
>  	.probe	= m25p_probe,
> 


-- 
Best regards,
Marek Vasut