[PATCH v3 0/2] Add a "label" property to the mtd device

[Marek Vasut]

On 02/09/2017 10:21 AM, Cédric Le Goater wrote:
> Hello,
> 
> Herer are a couple of patches adding a "label" property to the mtd
> device, which can be used to identify a specific chip on a system with
> multiple chips. This is common on the OpenPower boards, there can be
> four chips holding the firmware for the BMC and the firmware for the
> host, plus chips with golden images for recovery.

Series is
Reviewed-by: Marek Vasut <marek.vasut at gmail.com>

> Thanks,
> 
> C.
> 
>  Changes since v2:
> 
>  - only assign device name from label if mtd->name is undefined
> 
>  Changes since v1:
> 
>  - moved the use of the "label" property from mtd_set_dev_defaults()
>    to mtd_set_of_node() to let drivers keep control on how mtd->name
>    is set and allocated.
> 
> Cédric Le Goater (2):
>   mtd: name the mtd device with an optional label property
>   dt-bindings: mtd: add a common label property to all mtd devices
> 
>  Documentation/devicetree/bindings/mtd/common.txt | 15 +++++++++++++++
>  include/linux/mtd/mtd.h                          |  3 +++
>  2 files changed, 18 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mtd/common.txt
> 


-- 
Best regards,
Marek Vasut