[PATCH 2/3] mtd: nand: mxc: Add own write_page

Boris Brezillon boris.brezillon at free-electrons.com
Mon Dec 18 09:03:08 PST 2017


On Fri, 15 Dec 2017 09:55:03 +0100
Sascha Hauer <s.hauer at pengutronix.de> wrote:

> Now that we have our own read_page function add a write_page function
> for consistency aswell. This can be a lot easier than the generic
> function since we do not have to iterate over subpages but can write
> the whole page at once.
> 
> Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> ---
>  drivers/mtd/nand/mxc_nand.c | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
> index 65d5cde4692b..a54804f14bb1 100644
> --- a/drivers/mtd/nand/mxc_nand.c
> +++ b/drivers/mtd/nand/mxc_nand.c
> @@ -142,6 +142,8 @@ struct mxc_nand_devtype_data {
>  	void (*preset)(struct mtd_info *);
>  	int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
>  			uint8_t *buf, int oob_required, int page);
> +	int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
> +			  const uint8_t *buf, int oob_required, int page);
>  	void (*send_cmd)(struct mxc_nand_host *, uint16_t, int);
>  	void (*send_addr)(struct mxc_nand_host *, uint16_t, int);
>  	void (*send_page)(struct mtd_info *, unsigned int);
> @@ -658,6 +660,17 @@ static int mxc_nand_read_page_hwecc_v2_v3(struct mtd_info *mtd,
>  	return max_bitflips;
>  }
>  
> +static int mxc_nand_write_page_hwecc_v2_v3(struct mtd_info *mtd,
> +					   struct nand_chip *chip,
> +					   const uint8_t *buf, int oob_required,
> +					   int page)
> +{
> +	chip->write_buf(mtd, buf, mtd->writesize);
> +	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
> +
> +	return 0;
> +}
> +
>  static int mxc_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
>  				  u_char *ecc_code)
>  {
> @@ -1456,6 +1469,7 @@ static const struct mxc_nand_devtype_data imx27_nand_devtype_data = {
>  static const struct mxc_nand_devtype_data imx25_nand_devtype_data = {
>  	.preset = preset_v2,
>  	.read_page = mxc_nand_read_page_hwecc_v2_v3,
> +	.write_page = mxc_nand_write_page_hwecc_v2_v3,
>  	.send_cmd = send_cmd_v1_v2,
>  	.send_addr = send_addr_v1_v2,
>  	.send_page = send_page_v2,
> @@ -1482,6 +1496,7 @@ static const struct mxc_nand_devtype_data imx25_nand_devtype_data = {
>  static const struct mxc_nand_devtype_data imx51_nand_devtype_data = {
>  	.preset = preset_v3,
>  	.read_page = mxc_nand_read_page_hwecc_v2_v3,
> +	.write_page = mxc_nand_write_page_hwecc_v2_v3,
>  	.send_cmd = send_cmd_v3,
>  	.send_addr = send_addr_v3,
>  	.send_page = send_page_v3,
> @@ -1508,6 +1523,7 @@ static const struct mxc_nand_devtype_data imx51_nand_devtype_data = {
>  static const struct mxc_nand_devtype_data imx53_nand_devtype_data = {
>  	.preset = preset_v3,
>  	.read_page = mxc_nand_read_page_hwecc_v2_v3,
> +	.write_page = mxc_nand_write_page_hwecc_v2_v3,
>  	.send_cmd = send_cmd_v3,
>  	.send_addr = send_addr_v3,
>  	.send_page = send_page_v3,
> @@ -1766,6 +1782,7 @@ static int mxcnd_probe(struct platform_device *pdev)
>  	switch (this->ecc.mode) {
>  	case NAND_ECC_HW:
>  		this->ecc.read_page = host->devtype_data->read_page;
> +		this->ecc.write_page = host->devtype_data->write_page;
>  		this->ecc.calculate = mxc_nand_calculate_ecc;

I'm pretty sure you don't need this dummy calculate method now that you
provide your own ->write/read_page() implementations.

>  		this->ecc.hwctl = mxc_nand_enable_hwecc;
>  		this->ecc.correct = host->devtype_data->correct_data;




More information about the linux-mtd mailing list