[PATCH v5] mtd: spi-nor: add support for GD25Q256

[Cyrille Pitchen]

Hi Andy,

Le 23/08/2017 à 12:01, Andy Yan a écrit :
> Add support for GD25Q256, a 32MiB SPI Nor
> flash from GigaDevice.
> 
> The GD25Q256 uses S6 to set QE, which is
> different with other supported memories
> from GigaDevice that use S9. So we introduce
> a quad_enable function which can be set per
> memory in the flash_info list.
>

You should split the lines in the commit message at 75 columns hence
checkpatch won't complain and it would be more easy to read.

Besides, you should rather talk about bit 6 of the Status Register 1 and
bit 1 of the Status Register 2. It would be clearer than talking about
S6 and S9 and more consistent with other comments in spi-nor.


> Signed-off-by: Andy Yan <andy.yan at rock-chips.com>
> 
> ---
> 
> Changes in v5:
> - set quad_enable in flash_info list, thanks the guidance by Cyrille.
> 
> Changes in v4:
> - add SPI_NOR_HAS_LOCK and SPI_NOR_HAS_TB
> 
> Changes in v3:
> - rebase on top of spi-nor tree
> - add SPI_NOR_4B_OPCODES flag
> 
> Changes in v2:
> - drop one line unnecessary modification
> 
>  drivers/mtd/spi-nor/spi-nor.c | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index cf1d4a1..dc89ef2 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -89,6 +89,8 @@ struct flash_info {
>  #define NO_CHIP_ERASE		BIT(12) /* Chip does not support chip erase */
>  #define SPI_NOR_SKIP_SFDP	BIT(13)	/* Skip parsing of SFDP tables */
>  #define USE_CLSR		BIT(14)	/* use CLSR command */
> +
> +	int	(*quad_enable)(struct spi_nor *nor);
>  };
>  
>  #define JEDEC_MFR(info)	((info)->id[0])
> @@ -870,6 +872,8 @@ static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
>  	return ret;
>  }
>  
> +static int macronix_quad_enable(struct spi_nor *nor);
> +
>  /* Used when the "_ext_id" is two bytes at most */
>  #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
>  		.id = {							\
> @@ -997,6 +1001,12 @@ static const struct flash_info spi_nor_ids[] = {
>  			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
>  			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
>  	},
> +	{
> +		"gd25q256", INFO(0xc84019, 0, 64 * 1024, 512,
> +			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
> +			SPI_NOR_4B_OPCODES | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
> +			.quad_enable = macronix_quad_enable,
> +	},

This looks better but please split your patch into 2 patches:
1 - you add the .quad_enable member in 'struct flash_info' explaining
why in the commit message.

2 - you add the new entry for the gd25q256 in the spi_nor_ids[] array.


Best regards,

Cyrille
>  
>  	/* Intel/Numonyx -- xxxs33b */
>  	{ "160s33b",  INFO(0x898911, 0, 64 * 1024,  32, 0) },
> @@ -2388,6 +2398,15 @@ static int spi_nor_init_params(struct spi_nor *nor,
>  			params->quad_enable = spansion_quad_enable;
>  			break;
>  		}
> +
> +		/*
> +		 * Some manufacturer like GigaDevice may use different
> +		 * bit to set QE on different memories, so the MFR can't
> +		 * indicate the quad_enable method for this case, we need
> +		 * set it in flash info list.
> +		 */
> +		if (info->quad_enable)
> +			params->quad_enable = info->quad_enable;
>  	}
>  
>  	/* Override the parameters with data read from SFDP tables. */
>