[PATCH] map-ram chip driver: 16-bit block transfer

[Arnd Bergmann]

On Sat, Aug 12, 2017 at 7:39 PM, Boris Brezillon
<boris.brezillon at free-electrons.com> wrote:
> Le Fri, 11 Aug 2017 18:42:44 -0500,
> Sanjay Tandel <sanjay.tandel at rockwellcollins.com> a écrit :
>> On Fri, Aug 11, 2017 at 4:30 PM, Arnd Bergmann <arnd at arndb.de> wrote:
>> > On Fri, Aug 11, 2017 at 11:03 PM, Sanjay Tandel
>> > <sanjay.tandel at rockwellcollins.com> wrote:

>> Before, it used to corrupt every 2nd byte(2nd,4rth,6th ... upto N) in memory,
>> with memcpy_toio() using 8-bit accesses for our 16-bit chip.
>>
>> Now, with backporting 7ddfe625cbc1/1bd46782d08b, it corrupts (N + 1)th byte
>> in memory, when I tried to write N number of bytes (where N is not aligned to
>> 4-byte boundary).That means, it still tries 8-bit access for last odd byte and
>> ends up corrupting next byte.
>
> Yes, that's expected as the size is not 16bit aligned.
>
> Anyway, I read the whole thread again and AFAIU memcpy_to/fromio() is
> only appropriate if the bus controller the device is connected to is
> smart enough to hide all alignment problems to its users.
>
> Don't know what controller is causing trouble here, but you should
> probably have a dedicated driver (if that's not already the case) that
> overloads the ->copy_from()/->copy_to() methods to do the right thing
> for your memory controller.

Right, I think that is a good conclusion. My understanding from the discussion
so far is that the existing code in the core mtd layer works efficiently and
correctly on most bus interfaces, so we should keep that but have
workarounds in the controller driver for any bus interface where this is
not the case.

I think it would be different if this was a regression and the core MTD support
worked correctly in the past, but from what I read, it always behaved like
this.

       Arnd