[PATCH] mtd: nand: atmel: fix of_irq_get() error check

[Sergei Shtylyov]

of_irq_get() may return 0 as well as negative error number on failure,
while the driver only checks for the negative values.  The driver would
then call devm_request_irq() for IRQ0  in its probe method and never get
a valid interrupt.

Check for 'nc->irq <= 0' instead and return -ENXIO from the driver's probe
iff of_irq_get() returned 0.

Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>

---
The patch is against the 'master' branch of the 'linux-mtd.git' repo --
the 'nand/fixes'  branch seems too old...

 drivers/mtd/nand/atmel/nand-controller.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

Index: linux-mtd/drivers/mtd/nand/atmel/nand-controller.c
===================================================================
--- linux-mtd.orig/drivers/mtd/nand/atmel/nand-controller.c
+++ linux-mtd/drivers/mtd/nand/atmel/nand-controller.c
@@ -2078,11 +2078,11 @@ atmel_hsmc_nand_controller_legacy_init(s
 	}
 
 	nc->irq = of_irq_get(nand_np, 0);
-	if (nc->irq < 0) {
-		ret = nc->irq;
-		if (ret != -EPROBE_DEFER)
+	if (nc->irq <= 0) {
+		if (nc->irq != -EPROBE_DEFER)
 			dev_err(dev, "Failed to get IRQ number (err = %d)\n",
-				ret);
+				nc->irq);
+		ret = nc->irq ?: -ENXIO;
 		goto out;
 	}
 
@@ -2168,11 +2168,11 @@ atmel_hsmc_nand_controller_init(struct a
 
 	nc->irq = of_irq_get(np, 0);
 	of_node_put(np);
-	if (nc->irq < 0) {
+	if (nc->irq <= 0) {
 		if (nc->irq != -EPROBE_DEFER)
 			dev_err(dev, "Failed to get IRQ number (err = %d)\n",
 				nc->irq);
-		return nc->irq;
+		return nc->irq ?: -ENXIO;
 	}
 
 	np = of_parse_phandle(dev->of_node, "atmel,nfc-io", 0);