[PATCH v2 00/25] Add QCOM QPIC NAND support

[Abhishek Sahu]

On 2017-08-04 13:25, Boris Brezillon wrote:
> On Fri, 4 Aug 2017 09:53:05 +0200
> Boris Brezillon <boris.brezillon at free-electrons.com> wrote:
> 
>> Hi Abhishek,
>> 
>> On Wed, 19 Jul 2017 17:17:48 +0530
>> Abhishek Sahu <absahu at codeaurora.org> wrote:
>> 
>> > v2:
>> >
>> > 1. Addressed the review comments given in v1
>> > 2. Removed the DMA coherent buffer for register read and used
>> >    streaming DMA API’s
>> > 3. Reorganized the NAND read and write functions
>> > 4. Separated patch for driver and documentation changes
>> > 5. Changed the compatible string for EBI2
>> >
>> > v1:
>> >
>> > http://www.spinics.net/lists/devicetree/msg183706.html
>> >
>> > Abhishek Sahu (25):
>> >   mtd: nand: qcom: fix config error for BCH
>> >   mtd: nand: qcom: program NAND_DEV_CMD_VLD register
>> >   mtd: nand: qcom: change compatible string for EBI2 NANDC
>> >   dt-bindings: qcom_nandc: change compatible string for EBI2 NANDC
>> >   mtd: nand: qcom: remove redundant chip select compatible string
>> >   dt-bindings: qcom_nandc: remove chip select compatible string
>> >   mtd: nand: qcom: reorganize nand page read
>> >   mtd: nand: qcom: reorganize nand page write
>> >   mtd: nand: qcom: remove memset for clearing read register buffer
>> >   mtd: nand: qcom: reorganize nand devices probing
>> >   mtd: nand: qcom: support for NAND controller properties
>> >   dt-bindings: qcom_nandc: QPIC NAND documentation
>> >   mtd: nand: qcom: add QPIC NAND compatible string
>> >   mtd: nand: qcom: add and initialize QPIC DMA resources
>> >   mtd: nand: qcom: DMA mapping support for register read buffer
>> >   mtd: nand: qcom: allocate BAM transaction
>> >   mtd: nand: qcom: add BAM DMA descriptor handling
>> >   mtd: nand: qcom: support for passing flags in transfer functions
>> >   mtd: nand: qcom: support for read location registers
>> >   mtd: nand: qcom: erased codeword detection configuration
>> >   mtd: nand: qcom: support for QPIC page read/write
>> >   mtd: nand: qcom: QPIC raw write support
>> >   mtd: nand: qcom: change register offset defines with enums
>> >   dt-bindings: qcom_nandc: compatible string for version 1.5.0
>> >   mtd: nand: qcom: support for QPIC version 1.5.0
>> 
>> Applied patch 1 and 5 to 11 to nand/next [1].
>> 
> 
> My bad, it's 5 to 10, patch 11 did not apply cleanly. And I also forgot
> the link. Please rebase on this branch before sending your v3.
> 

  Thanks Boris.
  I will rebase remaining patches on this branch.

> Thanks,
> 
> Boris
> 
> [1]http://git.infradead.org/l2-mtd.git/shortlog/refs/heads/nand/next
> 
>> >
>> >  .../devicetree/bindings/mtd/qcom_nandc.txt         |   56 +-
>> >  drivers/mtd/nand/qcom_nandc.c                      | 1157 ++++++++++++++++----
>> >  2 files changed, 1010 insertions(+), 203 deletions(-)
>> >