[PATCH v8 05/16] watchdog: lantiq: add device tree binding documentation

Hauke Mehrtens hauke at hauke-m.de
Wed Aug 2 15:57:06 PDT 2017


The binding was not documented before, add the documentation now.

Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
 .../devicetree/bindings/watchdog/lantiq-wdt.txt    | 24 ++++++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/watchdog/lantiq-wdt.txt

diff --git a/Documentation/devicetree/bindings/watchdog/lantiq-wdt.txt b/Documentation/devicetree/bindings/watchdog/lantiq-wdt.txt
new file mode 100644
index 000000000000..18d4d8302702
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/lantiq-wdt.txt
@@ -0,0 +1,24 @@
+Lantiq WTD watchdog binding
+============================
+
+This describes the binding of the Lantiq watchdog driver.
+
+-------------------------------------------------------------------------------
+Required properties:
+- compatible		: Should be one of
+				"lantiq,wdt"
+				"lantiq,xrx100-wdt"
+				"lantiq,xrx200-wdt", "lantiq,xrx100-wdt"
+				"lantiq,falcon-wdt"
+- reg			: Address of the watchdog block
+- lantiq,rcu		: A phandle to the RCU syscon (required for
+			  "lantiq,falcon-wdt" and "lantiq,xrx100-wdt")
+
+-------------------------------------------------------------------------------
+Example for the watchdog on the xRX200 SoCs:
+		watchdog at 803f0 {
+			compatible = "lantiq,xrx200-wdt", "lantiq,xrx100-wdt";
+			reg = <0x803f0 0x10>;
+
+			lantiq,rcu = <&rcu0>;
+		};
-- 
2.11.0




More information about the linux-mtd mailing list