[PATCH v2 4/5] mtd: nand: add support for Micron on-die ECC
Thomas Petazzoni
thomas.petazzoni at free-electrons.com
Sat Apr 29 02:06:45 PDT 2017
Now that the core NAND subsystem has support for on-die ECC, this commit
brings the necessary code to support on-die ECC on Micron NANDs.
In micron_nand_init(), we detect if the Micron NAND chip supports on-die
ECC mode, by checking a number of conditions:
- It must be an ONFI NAND
- It must be a SLC NAND
- Enabling *and* disabling on-die ECC must work
- The on-die ECC must be correcting 4 bits per 512 bytes of data. Some
Micron NAND chips have an on-die ECC able to correct 8 bits per 512
bytes of data, but they work slightly differently and therefore we
don't support them in this patch.
Then, if the on-die ECC cannot be disabled (some Micron NAND have on-die
ECC forcefully enabled), we bail out, as we don't support such
NANDs. Indeed, the implementation of raw_read()/raw_write() make the
assumption that on-die ECC can be disabled. Support for Micron NANDs
with on-die ECC forcefully enabled can easily be added, but in the
absence of such HW for testing, we preferred to simply bail out.
If the on-die ECC is supported, and requested in the Device Tree, then
it is indeed enabled, by using custom implementations of the
->read_page(), ->read_page_raw(), ->write_page() and ->write_page_raw()
operation to properly handle the on-die ECC.
In the non-raw functions, we need to enable the internal ECC engine
before issuing the NAND_CMD_READ0 or NAND_CMD_SEQIN commands, which is
why we set the NAND_ECC_CUSTOM_PAGE_ACCESS option at initialization
time (it asks the NAND core to let the NAND driver issue those
commands).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
drivers/mtd/nand/nand_micron.c | 215 +++++++++++++++++++++++++++++++++++++++++
include/linux/mtd/nand.h | 2 +
2 files changed, 217 insertions(+)
diff --git a/drivers/mtd/nand/nand_micron.c b/drivers/mtd/nand/nand_micron.c
index 8770110..0987f32 100644
--- a/drivers/mtd/nand/nand_micron.c
+++ b/drivers/mtd/nand/nand_micron.c
@@ -17,6 +17,12 @@
#include <linux/mtd/nand.h>
+/*
+ * Special Micron status bit that indicates when the block has been
+ * corrected by on-die ECC and should be rewritten
+ */
+#define NAND_STATUS_WRITE_RECOMMENDED BIT(3)
+
struct nand_onfi_vendor_micron {
u8 two_plane_read;
u8 read_cache;
@@ -66,9 +72,191 @@ static int micron_nand_onfi_init(struct nand_chip *chip)
return 0;
}
+static int micron_nand_on_die_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section >= 4)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 8;
+ oobregion->length = 8;
+
+ return 0;
+}
+
+static int micron_nand_on_die_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section >= 4)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 2;
+ oobregion->length = 6;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops micron_nand_on_die_ooblayout_ops = {
+ .ecc = micron_nand_on_die_ooblayout_ecc,
+ .free = micron_nand_on_die_ooblayout_free,
+};
+
+static int micron_nand_on_die_ecc_setup(struct nand_chip *chip, bool enable)
+{
+ u8 feature[ONFI_SUBFEATURE_PARAM_LEN] = { 0, };
+
+ if (enable)
+ feature[0] |= ONFI_FEATURE_ON_DIE_ECC_EN;
+
+ return chip->onfi_set_features(nand_to_mtd(chip), chip,
+ ONFI_FEATURE_ON_DIE_ECC, feature);
+}
+
+static int
+micron_nand_read_page_on_die_ecc(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required,
+ int page)
+{
+ int status;
+ int max_bitflips = 0;
+
+ micron_nand_on_die_ecc_setup(chip, true);
+
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
+ chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
+ status = chip->read_byte(mtd);
+ if (status & NAND_STATUS_FAIL)
+ mtd->ecc_stats.failed++;
+ /*
+ * The internal ECC doesn't tell us the number of bitflips
+ * that have been corrected, but tells us if it recommends to
+ * rewrite the block. If it's the case, then we pretend we had
+ * a number of bitflips equal to the ECC strength, which will
+ * hint the NAND core to rewrite the block.
+ */
+ else if (status & NAND_STATUS_WRITE_RECOMMENDED)
+ max_bitflips = chip->ecc.strength;
+
+ chip->cmdfunc(mtd, NAND_CMD_READ0, -1, -1);
+
+ nand_read_page_raw(mtd, chip, buf, oob_required, page);
+
+ micron_nand_on_die_ecc_setup(chip, false);
+
+ return max_bitflips;
+}
+
+static int
+micron_nand_write_page_on_die_ecc(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required,
+ int page)
+{
+ micron_nand_on_die_ecc_setup(chip, true);
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
+ nand_write_page_raw(mtd, chip, buf, oob_required, page);
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+ micron_nand_on_die_ecc_setup(chip, false);
+
+ return 0;
+}
+
+static int
+micron_nand_read_page_raw_on_die_ecc(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ uint8_t *buf, int oob_required,
+ int page)
+{
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
+ nand_read_page_raw(mtd, chip, buf, oob_required, page);
+
+ return 0;
+}
+
+static int
+micron_nand_write_page_raw_on_die_ecc(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf, int oob_required,
+ int page)
+{
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
+ nand_write_page_raw(mtd, chip, buf, oob_required, page);
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+ return 0;
+}
+
+enum {
+ /* The NAND flash doesn't support on-die ECC */
+ MICRON_ON_DIE_UNSUPPORTED,
+
+ /*
+ * The NAND flash supports on-die ECC and it can be
+ * enabled/disabled by a set features command.
+ */
+ MICRON_ON_DIE_SUPPORTED,
+
+ /*
+ * The NAND flash supports on-die ECC, and it cannot be
+ * disabled.
+ */
+ MICRON_ON_DIE_MANDATORY,
+};
+
+/*
+ * Try to detect if the NAND support on-die ECC. To do this, we enable
+ * the feature, and read back if it has been enabled as expected. We
+ * also check if it can be disabled, because some Micron NANDs do not
+ * allow disabling the on-die ECC and we don't support such NANDs for
+ * now.
+ *
+ * This function also has the side effect of disabling on-die ECC if
+ * it had been left enabled by the firmware/bootloader.
+ */
+static int micron_supports_on_die_ecc(struct nand_chip *chip)
+{
+ u8 feature[ONFI_SUBFEATURE_PARAM_LEN] = { 0, };
+ int ret;
+
+ if (chip->onfi_version == 0)
+ return MICRON_ON_DIE_UNSUPPORTED;
+
+ if (chip->bits_per_cell != 1)
+ return MICRON_ON_DIE_UNSUPPORTED;
+
+ ret = micron_nand_on_die_ecc_setup(chip, true);
+ if (ret)
+ return MICRON_ON_DIE_UNSUPPORTED;
+
+ chip->onfi_get_features(nand_to_mtd(chip), chip,
+ ONFI_FEATURE_ON_DIE_ECC, feature);
+ if ((feature[0] & ONFI_FEATURE_ON_DIE_ECC_EN) == 0)
+ return MICRON_ON_DIE_UNSUPPORTED;
+
+ ret = micron_nand_on_die_ecc_setup(chip, false);
+ if (ret)
+ return MICRON_ON_DIE_UNSUPPORTED;
+
+ chip->onfi_get_features(nand_to_mtd(chip), chip,
+ ONFI_FEATURE_ON_DIE_ECC, feature);
+ if (feature[0] & ONFI_FEATURE_ON_DIE_ECC_EN)
+ return MICRON_ON_DIE_MANDATORY;
+
+ /*
+ * Some Micron NANDs have an on-die ECC of 4/512, some other
+ * 8/512. We only support the former.
+ */
+ if (chip->onfi_params.ecc_bits != 4)
+ return MICRON_ON_DIE_UNSUPPORTED;
+
+ return MICRON_ON_DIE_SUPPORTED;
+}
+
static int micron_nand_init(struct nand_chip *chip)
{
struct mtd_info *mtd = nand_to_mtd(chip);
+ int ondie;
int ret;
ret = micron_nand_onfi_init(chip);
@@ -78,6 +266,33 @@ static int micron_nand_init(struct nand_chip *chip)
if (mtd->writesize == 2048)
chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+ ondie = micron_supports_on_die_ecc(chip);
+
+ if (ondie == MICRON_ON_DIE_MANDATORY) {
+ pr_err("On-die ECC forcefully enabled, not supported\n");
+ return -EINVAL;
+ }
+
+ if (chip->ecc.mode == NAND_ECC_ON_DIE) {
+ if (ondie == MICRON_ON_DIE_UNSUPPORTED) {
+ pr_err("On-die ECC selected but not supported\n");
+ return -EINVAL;
+ }
+
+ chip->ecc.options = NAND_ECC_CUSTOM_PAGE_ACCESS;
+ chip->ecc.bytes = 32;
+ chip->ecc.strength = 4;
+ chip->ecc.algo = NAND_ECC_BCH;
+ chip->ecc.read_page = micron_nand_read_page_on_die_ecc;
+ chip->ecc.write_page = micron_nand_write_page_on_die_ecc;
+ chip->ecc.read_page_raw =
+ micron_nand_read_page_raw_on_die_ecc;
+ chip->ecc.write_page_raw =
+ micron_nand_write_page_raw_on_die_ecc;
+
+ mtd_set_ooblayout(mtd, µn_nand_on_die_ooblayout_ops);
+ }
+
return 0;
}
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 7a01d2e..f019916 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -258,6 +258,8 @@ struct nand_chip;
/* Vendor-specific feature address (Micron) */
#define ONFI_FEATURE_ADDR_READ_RETRY 0x89
+#define ONFI_FEATURE_ON_DIE_ECC 0x90
+#define ONFI_FEATURE_ON_DIE_ECC_EN BIT(3)
/* ONFI subfeature parameters length */
#define ONFI_SUBFEATURE_PARAM_LEN 4
--
2.7.4
More information about the linux-mtd
mailing list