[PATCH 2/5] mtd: nand: gpmi: add i.MX 7 SoC support
Stefan Agner
stefan at agner.ch
Fri Apr 21 10:38:28 PDT 2017
On 2017-04-21 10:22, Marek Vasut wrote:
> On 04/21/2017 06:19 PM, Stefan Agner wrote:
>> On 2017-04-21 06:08, Marek Vasut wrote:
>>> On 04/21/2017 05:15 AM, Stefan Agner wrote:
>>>> On 2017-04-20 19:03, Marek Vasut wrote:
>>>>> On 04/21/2017 03:07 AM, Stefan Agner wrote:
>>>>>> Add support for i.MX 7 SoC. The i.MX 7 has a slightly different
>>>>>> clock architecture requiring only two clocks to be referenced.
>>>>>> The IP is slightly different compared to i.MX 6SoloX, but currently
>>>>>> none of this differences are in use so there is no detection needed
>>>>>> and the driver can reuse IS_MX6SX.
>>>>>>
>>>>>> Signed-off-by: Stefan Agner <stefan at agner.ch>
>>>>>> ---
>>>>>> drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 15 +++++++++++++++
>>>>>> 1 file changed, 15 insertions(+)
>>>>>>
>>>>>> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
>>>>>> index c8bbf5da2ab8..4a45d37ddc80 100644
>>>>>> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
>>>>>> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
>>>>>> @@ -127,6 +127,18 @@ static const struct gpmi_devdata gpmi_devdata_imx6sx = {
>>>>>> .clks_count = ARRAY_SIZE(gpmi_clks_for_mx6),
>>>>>> };
>>>>>>
>>>>>> +static const char * const gpmi_clks_for_mx7d[] = {
>>>>>> + "gpmi_io", "gpmi_bch_apb",
>>>>>> +};
>>>>>> +
>>>>>> +static const struct gpmi_devdata gpmi_devdata_imx7d = {
>>>>>> + .type = IS_MX6SX,
>>>>>
>>>>> Would it make sense to use IS_MX7 here already to prevent future surprises ?
>>>>>
>>>>
>>>> Yeah I was thinking we can do it once we have an actual reason to
>>>> distinguish.
>>>
>>> So what are the differences anyway ?
>>>
>>
>> I did not check the details, but Han's patchset (link in cover letter)
>> mentions:
>> "add the HW bitflip detection and correction for i.MX6QP and i.MX7D."...
>
> Oh, interesting.
>
>>>> But then, adding the type would only require 2-3 lines of change if I
>>>> add it to the GPMI_IS_MX6 macro...
>>>
>>> Then at least add a comment because using type = IMX6SX right under
>>> gpmi_data_mx7d can trigger some head-scratching. And put my R-B on V2.
>>
>> FWIW, I mentioned it in the commit message.
>>
>> I think rather then adding a comment it is cleaner to just add IS_IMX7D
>> and add it to the GPMI_IS_MX6 macro. That does not need a comment since
>> it implicitly says we have a i.MX 7 but treat it like i.MX 6 and it is a
>> rather small change. Does that sound acceptable?
>
> Sure, that's even better, thanks.
>
> btw isn't there some single-core mx7 (mx7s ?) , maybe we should just go
> with mx7 (without the d suffix). I dunno if it has GPMI NAND though, so
> maybe mx7d is the right thing to do here ...
>
There is a Solo version yes, and it has GPMI NAND too. However, almost
all i.MX 7 IPs have been named imx7d by NXP for some reason (including
compatible strings, see grep -r -e imx7 Documentation/), so I thought I
stay consistent here...
--
Stefan
>> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
>> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
>> @@ -132,7 +132,7 @@ static const char * const gpmi_clks_for_mx7d[] = {
>> };
>>
>> static const struct gpmi_devdata gpmi_devdata_imx7d = {
>> - .type = IS_MX6SX,
>> + .type = IS_MX7D,
>> .bch_max_ecc_strength = 62,
>> .max_chain_delay = 12,
>> .clks = gpmi_clks_for_mx7d,
>> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
>> b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
>> index 2e584e18d980..f2cc13abc896 100644
>> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
>> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
>> @@ -123,7 +123,8 @@ enum gpmi_type {
>> IS_MX23,
>> IS_MX28,
>> IS_MX6Q,
>> - IS_MX6SX
>> + IS_MX6SX,
>> + IS_MX7D,
>> };
>>
>> struct gpmi_devdata {
>> @@ -307,6 +308,8 @@ void gpmi_copy_bits(u8 *dst, size_t dst_bit_off,
>> #define GPMI_IS_MX28(x) ((x)->devdata->type == IS_MX28)
>> #define GPMI_IS_MX6Q(x) ((x)->devdata->type == IS_MX6Q)
>> #define GPMI_IS_MX6SX(x) ((x)->devdata->type == IS_MX6SX)
>> +#define GPMI_IS_MX7D(x) ((x)->devdata->type == IS_MX7D)
>>
>> -#define GPMI_IS_MX6(x) (GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x))
>> +#define GPMI_IS_MX6(x) (GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x) ||
>> \
>> + GPMI_IS_MX7D(x))
>> #endif
>>
>> --
>> Stefan
>>
More information about the linux-mtd
mailing list