[PATCH 0/4] mtd: extend support for "fixed-partitions"

[Rafał Miłecki]

From: Rafał Miłecki <rafal at milecki.pl>

My recent work on adding wide support for linux,part-probe was reviewed and
kind of Nack-ed, but fortunately I was pointed to the old (!) patchset from
Brian doing similar thing in a cleaner way.

This patchset picks the important changes from Brian, cleans them and rebases.

At this point this simply adds a full support for "fixed-partitions" binding.
It should also make adding new bindings easier in the future.

I've successfully tested this with bcm47xxsflash driver on Tenda AC9 device. I
used following DT node to get "ofpart" driver parse & register my partitions.

&bcma-sflash {
	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		partition at 0 {
			label = "cfe";
			reg = <0x0000000 0x40000>;
			read-only;
		};

		firmware at 40000 {
			label = "firmware";
			reg = <0x40000 0x7f0000>;
		};
	};
};

Brian: I took your patches so I preserved your Signed-off-by, but please review
these changes to make sure I didn't do anything nasty there.

Brian Norris (3):
  dt-bindings: mtd: make partitions doc a bit more generic
  mtd: partitions: factor out code calling parser
  mtd: partitions: add of_match_table parser matching

Rafał Miłecki (1):
  mtd: ofpart: add of_match_table with "fixed-partitions"

 .../devicetree/bindings/mtd/partition.txt          | 28 ++++++--
 drivers/mtd/mtdpart.c                              | 80 +++++++++++++++++++---
 drivers/mtd/ofpart.c                               |  7 ++
 include/linux/mtd/partitions.h                     |  1 +
 4 files changed, 101 insertions(+), 15 deletions(-)

-- 
2.11.0