[PATCH 1/2] mtd: dataflash: Make use of "extened device information"
Marek Vasut
marek.vasut at gmail.com
Fri Apr 14 07:19:32 PDT 2017
On 04/12/2017 04:58 PM, Andrey Smirnov wrote:
> On Tue, Apr 11, 2017 at 11:29 AM, Marek Vasut <marek.vasut at gmail.com> wrote:
>> On 04/11/2017 06:17 PM, Andrey Smirnov wrote:
>>> In anticipation of supporting chips that need it, extend the size of
>>> struct flash_info's 'jedec_id' field to make room 2 byte of extended
>>> device information as well as add code to fetch this data during
>>> jedec_probe().
>>>
>>> Cc: cphealy at gmail.com
>>> Cc: David Woodhouse <dwmw2 at infradead.org>
>>> Cc: Brian Norris <computersforpeace at gmail.com>
>>> Cc: Boris Brezillon <boris.brezillon at free-electrons.com>
>>> Cc: Marek Vasut <marek.vasut at gmail.com>
>>> Cc: Richard Weinberger <richard at nod.at>
>>> Cc: Cyrille Pitchen <cyrille.pitchen at atmel.com>
>>> Cc: linux-kernel at vger.kernel.org
>>> Signed-off-by: Andrey Smirnov <andrew.smirnov at gmail.com>
>>> ---
>>> drivers/mtd/devices/mtd_dataflash.c | 113 +++++++++++++++++++++---------------
>>> 1 file changed, 66 insertions(+), 47 deletions(-)
>>>
>>> diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
>>> index f9e9bd1..9a98cdc 100644
>>> --- a/drivers/mtd/devices/mtd_dataflash.c
>>> +++ b/drivers/mtd/devices/mtd_dataflash.c
>>> @@ -689,7 +689,7 @@ struct flash_info {
>>> /* JEDEC id has a high byte of zero plus three data bytes:
>>> * the manufacturer id, then a two byte device id.
>>> */
>>> - uint32_t jedec_id;
>>> + uint64_t jedec_id;
>>>
>>> /* The size listed here is what works with OP_ERASE_PAGE. */
>>> unsigned nr_pages;
>>> @@ -712,61 +712,35 @@ static struct flash_info dataflash_data[] = {
>>> * These newer chips also support 128-byte security registers (with
>>> * 64 bytes one-time-programmable) and software write-protection.
>>> */
>>> - { "AT45DB011B", 0x1f2200, 512, 264, 9, SUP_POW2PS},
>>> - { "at45db011d", 0x1f2200, 512, 256, 8, SUP_POW2PS | IS_POW2PS},
>>> + { "AT45DB011B", 0x1f22000000, 512, 264, 9, SUP_POW2PS},
>>> + { "at45db011d", 0x1f22000000, 512, 256, 8, SUP_POW2PS | IS_POW2PS},
>>>
>>> - { "AT45DB021B", 0x1f2300, 1024, 264, 9, SUP_POW2PS},
>>> - { "at45db021d", 0x1f2300, 1024, 256, 8, SUP_POW2PS | IS_POW2PS},
>>> + { "AT45DB021B", 0x1f23000000, 1024, 264, 9, SUP_POW2PS},
>>> + { "at45db021d", 0x1f23000000, 1024, 256, 8, SUP_POW2PS | IS_POW2PS},
>>>
>>> - { "AT45DB041x", 0x1f2400, 2048, 264, 9, SUP_POW2PS},
>>> - { "at45db041d", 0x1f2400, 2048, 256, 8, SUP_POW2PS | IS_POW2PS},
>>> + { "AT45DB041x", 0x1f24000000, 2048, 264, 9, SUP_POW2PS},
>>> + { "at45db041d", 0x1f24000000, 2048, 256, 8, SUP_POW2PS | IS_POW2PS},
>>>
>>> - { "AT45DB081B", 0x1f2500, 4096, 264, 9, SUP_POW2PS},
>>> - { "at45db081d", 0x1f2500, 4096, 256, 8, SUP_POW2PS | IS_POW2PS},
>>> + { "AT45DB081B", 0x1f25000000, 4096, 264, 9, SUP_POW2PS},
>>> + { "at45db081d", 0x1f25000000, 4096, 256, 8, SUP_POW2PS | IS_POW2PS},
>>>
>>> - { "AT45DB161x", 0x1f2600, 4096, 528, 10, SUP_POW2PS},
>>> - { "at45db161d", 0x1f2600, 4096, 512, 9, SUP_POW2PS | IS_POW2PS},
>>> + { "AT45DB161x", 0x1f26000000, 4096, 528, 10, SUP_POW2PS},
>>> + { "at45db161d", 0x1f26000000, 4096, 512, 9, SUP_POW2PS | IS_POW2PS},
>>>
>>> - { "AT45DB321x", 0x1f2700, 8192, 528, 10, 0}, /* rev C */
>>> + { "AT45DB321x", 0x1f27000000, 8192, 528, 10, 0}, /* rev C */
>>>
>>> - { "AT45DB321x", 0x1f2701, 8192, 528, 10, SUP_POW2PS},
>>> - { "at45db321d", 0x1f2701, 8192, 512, 9, SUP_POW2PS | IS_POW2PS},
>>> + { "AT45DB321x", 0x1f27010000, 8192, 528, 10, SUP_POW2PS},
>>> + { "at45db321d", 0x1f27010000, 8192, 512, 9, SUP_POW2PS | IS_POW2PS},
>>>
>>> - { "AT45DB642x", 0x1f2800, 8192, 1056, 11, SUP_POW2PS},
>>> - { "at45db642d", 0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
>>> + { "AT45DB642x", 0x1f28000000, 8192, 1056, 11, SUP_POW2PS},
>>> + { "at45db642d", 0x1f28000000, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
>>> };
>>>
>>> -static struct flash_info *jedec_probe(struct spi_device *spi)
>>> +static struct flash_info *jedec_lookup(struct spi_device *spi,
>>> + uint64_t jedec)
>>
>> const u64 (not uint64_t , this is NOT userspace). Fix globally.
>>
>
> I am not sure what this has to do with userspace. There's plenty of
> kernel code that uses standard C99 types, coding style guide calls
> them out as being OK
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/coding-style.rst?id=refs/tags/v4.11-rc6#n364
>
> but more to the point, the rest of this file uses nothing but C99
> types. Why should this function be any different?
This is explained in Linus's rant [1],
Re: [RFC] Splitting kernel headers and deprecating __KERNEL__
[1] https://lwn.net/Articles/113367/
It'd be nice if you could clean the file up, it should be trivial sed
replacement, ie sed -i "s/uint\([0-9]\+\)_t/u\1/g" ; git add ; git
commit -sm ; git send-email , done .
>>> {
>>> - int tmp;
>>> - uint8_t code = OP_READ_ID;
>>> - uint8_t id[3];
>>> - uint32_t jedec;
>>> - struct flash_info *info;
>>> - int status;
>>> -
>>> - /* JEDEC also defines an optional "extended device information"
>>> - * string for after vendor-specific data, after the three bytes
>>> - * we use here. Supporting some chips might require using it.
>>> - *
>>> - * If the vendor ID isn't Atmel's (0x1f), assume this call failed.
>>> - * That's not an error; only rev C and newer chips handle it, and
>>> - * only Atmel sells these chips.
>>> - */
>>> - tmp = spi_write_then_read(spi, &code, 1, id, 3);
>>> - if (tmp < 0) {
>>> - pr_debug("%s: error %d reading JEDEC ID\n",
>>> - dev_name(&spi->dev), tmp);
>>> - return ERR_PTR(tmp);
>>> - }
>>> - if (id[0] != 0x1f)
>>> - return NULL;
>>> -
>>> - jedec = id[0];
>>> - jedec = jedec << 8;
>>> - jedec |= id[1];
>>> - jedec = jedec << 8;
>>> - jedec |= id[2];
>>> + int tmp, status;
>>> + struct flash_info *info;
>>>
>>> for (tmp = 0, info = dataflash_data;
>>> tmp < ARRAY_SIZE(dataflash_data);
>>> @@ -796,12 +770,57 @@ static struct flash_info *jedec_probe(struct spi_device *spi)
>>> }
>>> }
>>>
>>> + return NULL;
>>> +}
>>> +
>>> +static struct flash_info *jedec_probe(struct spi_device *spi)
>>> +{
>>> + int tmp;
>>> + uint8_t code = OP_READ_ID;
>>> + uint8_t id[8] = {0};
>>> + const unsigned int id_size = 5;
>>> + const unsigned int first_byte = sizeof(id) - id_size;
>>> + const uint64_t eid_mask = GENMASK_ULL(63, 16);
>>
>> Can we have some macro, like DATAFLASH_ID_BYTES and derive all the masks
>> and crap from it instead of having this stack of variables ?
>>
>
> Can you give me an example of what you have in mind? A macro that
> would simplify this code is not very obvious to me.
If there is nothing obvious, then we have to live with this.
It just feels like there are way too many ad-hoc numbers which
might be somehow interdependent and thus could be inferred one
from the other.
>>> + uint64_t jedec;
>>> + struct flash_info *info;
>>
>> Replace the tab after the type with space please.
>
> Why? This code was originally using tabs, the only thing I changed was
> type of 'jedec' variable from uint32_t to uint64_t.
Admittedly, I didn't look at the removal part and the patch makes it
look like you rewrote half of the function. And since you're adding new
stuff, you might as well fix the minor warts of the old code while at it.
>>
>>> + /* JEDEC also defines an optional "extended device information"
>>
>> Multi-line comment format:
>>
>> /*
>> * foo
>> * bar
>> */
>>
>
> This is how the code was before my patch. I just moved this block
> without changing it, so I'd prefer to not make that fact less clear by
> doing re-formatting.
See above, you might as well fix this .
>>> + * string for after vendor-specific data, after the three bytes
>>> + * we use here. Supporting some chips might require using it.
>>> + *
>>> + * If the vendor ID isn't Atmel's (0x1f), assume this call failed.
>>> + * That's not an error; only rev C and newer chips handle it, and
>>> + * only Atmel sells these chips.
>>> + */
>>> + tmp = spi_write_then_read(spi, &code, 1, &id[first_byte], id_size);
>>> + if (tmp < 0) {
>>
>> Use ret instead of tmp.
>
> Ditto.
See my comment above.
>>> + pr_debug("%s: error %d reading JEDEC ID\n",
>>> + dev_name(&spi->dev), tmp);
>>> + return ERR_PTR(tmp);
>>> + }
>>
>> newline
>
> Ditto.
>
>>
>>> + if (id[first_byte] != 0x1f)
>>
>> Use a macro, like CFI_MFR_ATMEL ?
>>
>
> Ditto.
>
>>> + return NULL;
>>> +
>>> + jedec = be64_to_cpup((__be64 *)id);
>>> +
>>> + info = jedec_lookup(spi, jedec);
>>> + if (info)
>>> + return info;
>>> + /*
>>> + * Clear extended id bits and try to find a match again
>>> + */
>>
>> This could be a single-line comment.
>
> OK, I'll change that.
>
> Thanks,
> Andrey Smirnov
>
--
Best regards,
Marek Vasut
More information about the linux-mtd
mailing list