UBI/UBIFS on NAND with PEB 4MB

Matthias Auchmann m.auchmann at artech.at
Tue Apr 11 02:26:32 PDT 2017


Hi guys!

Sorry that not much happened for such a long time. My colleague Markus has now picked up the investigation!

BR,

Matthias


-----Original Message-----
From: linux-mtd [mailto:linux-mtd-bounces at lists.infradead.org] On Behalf Of Matthias Auchmann
Sent: Wednesday, December 14, 2016 9:59 AM
To: Boris Brezillon
Cc: linux-mtd at lists.infradead.org
Subject: RE: UBI/UBIFS on NAND with PEB 4MB

Hi Boris!

Thanks for your reply. Just now I found out that when I disable the DMA of my NAND driver, ubiattach/detach works. So it must be a problem with the DMA and/or cache coherency on this brand-new cache coherent interconnect or whatever. I will investigate it later! Sorry for having bothered you guys with that, but as I said yesterday night it was kind of preliminary ;-)

On the patches for the UBIFS_MAX_LEB_SZ, can you tell me where I can find those patches? That would be great ;-)

BR,

Matthias


-----Original Message-----
From: Boris Brezillon [mailto:boris.brezillon at free-electrons.com]
Sent: Wednesday, December 14, 2016 8:43 AM
To: Matthias Auchmann
Cc: linux-mtd at lists.infradead.org
Subject: Re: UBI/UBIFS on NAND with PEB 4MB

Hi Matthias,

On Tue, 13 Dec 2016 20:40:59 +0100
Matthias Auchmann <m.auchmann at artech.at> wrote:

> Hi guys!
> 
> I'm trying to use UBI and UBIFS on a Micron MT29F32G08ABCDBJ4 SLC NAND with an erase block size 4MB.

Woh! an SLC NAND with 4MB eraseblocks, that's surprizing.

> 
> First of all, mkfs.ubifs wouldn't support a LEB larger than UBIFS_MAX_LEB_SZ being (2*1024*1024).

This is the easy part ;). We already have patches to increase the limit in different ubi utils (IIRC, it's also needed in ubinize).

> 
> When I use ubiattach though, it seems to be quite happy, giving me that on a 128MB partition:
> 
> UBI device number 0, total 32 LEBs (133169152 bytes, 127.0 MiB), 
> available 8 LEBs (33292288 bytes, 31.8 MiB), LEB size 4161536 bytes
> (4.0 MiB)
> 
> Anyway, when I detach and reattach, it won't work. Details are in the bottom of that mail, but since I haven't thoroughly looked into it myself yet, this is only for those who care... I don't want to ask preliminary questions.
> 
> Anyway, my questions I guess then are:
> -) Are there any patches/branches that enable UBIFS to be run with a LEB of 4161536?
> -) Are there any known limitations with using a 4MiB PEB with UBI itself, or shall I assume for now that the problem is on my board/NAND driver regarding the above ubiattach errors upon the second attach?

I don't think so. We did several tests on different MLC NANDs exposing 4MB blocks, and the UBI/UBIFS layers were not complaining about that (we had other problems related to the MLC constraints).
What's your controller?

Regards,

Boris

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/



More information about the linux-mtd mailing list